PPS plastic Circulation pump
-
Model Number:
809-PL-HS 115V
-
Product Name:PPS plastic Circulation pump
-
Manufacturer:
-
Series (27 Models):
March 809-PL-HS 115V
Inline circulating pump, Ryton pump housing. 809HS is a PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum) is the oldest material in the high performance, injection-moldable category. Food Grade plastic. For beer making will handle wort at boiling temperature. H315HF BrewSculpture.The ultimate in reliability in circulating pumps for industrial / hydronic solar / applications.
Depending on application, March hydronic pumps are available in a variety of materials, including plastic, bronze, stainless steel, and cast iron. Specific models are designed to operated with fluid temperatures as high as 350F (176C), such as in hot water systems or with hot oil for food products such as beer wart. Special designs can withstand temperatures up to 500F (260C). Popular for use in domestic, industrial and commercial hot water solar heating applications, home brew beer. Because the motors can be removed without draining the system, service is greatly simplified. External male threaded inlet and outlet 180 degrees apart. Seal-less Magnetic drive. Made in the USA. **809-PL is Polysulfil Plastic
This pump can be used for an all-grain system, or used to pump wort through a counterflow or brazed plate heat exchanger.
| Model Number | 809-PL-HS 115V |
|---|---|
| part number | 0809-0261-0100 |
| Series | 809 & 815 Circulating Pumps 4-8gpm |
| Max Flow (GPM.) | 7 |
| Max Flow GPH | 420 |
| TDH Maximum (Ft) | 12 |
| TDH Maximum (PSI) | 6 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.0400 |
| Watts | 90.000000 |
| Inlet Connection Type | MNPT |
| inlet size | Less than 1in |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | 316SS, PPS-Ryton, Teflon |
| Elastomers / O-ring | Silicone |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 50-60 |
| Motor | Open |
| Speed (RPM.) | 3450 |
| Self Priming | No |
| Max Operating Temperature (F) | 250 |
| Viscosity | Cream 16.50 cp 100.00 ssu |
| Shaft | 316SS |
| Length (In.) | 8.000000 |
| Mechanical Seal | No |
| Other | mag pump |
| Pump Bearing | PPS-Ryton |
| Impeller Material | Ryton |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | No |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 5.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
March Pump – Originator of the Centrifugal Sealless Magnetic Drive Pump
US Manufacturer Of Centrifugal Sealless Magnetic Drive Pumps for Chemical, Industrial, Medical, Marine, Solar and OEM applications.
Flows from 1/2 gpm to 200 gpm
Heads up to 160 feet
Available in plastic and metallic construction
AC, DC, Explosion Proof, and Air Motors
Submersible and Non-Submersible