PEO-Self prime CI pump 3 hp
Series (20 Models):
Product Name:PEO-Self prime CI pump 3 hp
Pump End Only no motor
Pump End Only kit for field assembly to customer motor.Quick Prime QP Self-Priming Centrifugal pumps are designed for demanding jobs where a lot of water is required over a long period of time. Ruggedly built to meet the demands for long, hard continuous service without overworking or overloading the motor.
3 HP , impeller is a NO lead brass, plastic, cast iron casing and phenolic diffuser.
See Performance chart for flow / pressure at various suction lifts.
For parts see the PDF manual under the IMAGE tab below.
|Series||Quick Prime Sprinkler Pump 55-104gpm QP|
|Max Flow (GPM.)||104|
|Max Flow GPH||6240|
|TDH Maximum (Ft)||120|
|TDH Maximum (PSI)||52|
|Inlet Connection Type||FNPT|
|inlet size||1 ½"|
|Outlet Connection Type||FNPT|
|Elastomers / O-ring||Buna-Nitrile|
|Motor Frame||56J thrd|
|Suction Lift (FT.)||25|
|Max Operating Temperature (F)||110|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal||TYPE 21|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Other||1/4" drain plug installed at bottom of casing. Cast Iron parts are enamel coated inside and out.|
|Impeller Material||Brass, closed|
|Country of Manufacture||United States|