Low Pressure Peristaltic Pump 85 GPD 4-20

Stenner's adjustable variable speed pump has a DC motor with a detachable pump head which is universal to all Stenner pumps. The SVP1 pump has a simple four button keypad with a large LED display. The pump is manually adjusted in 1% increments with the up and down arrows on the keypad. The SVP1 also includes prime and on/off buttons on the keypad. All Stenner metering pumps have a 3-point roller design in the pump head, which acts as a check valve to prevent back flow, siphoning, overdosing and loss of prime. 

The SVP Series has been discontinued and is no longer available.  Direct replacement is the enhanced S420 Series.

PATENTED MECHANICAL CONTROL – Stenner’s unique control mechanism allows the pump’s output to be scaled from. 5% to 100% with the simple turn of a dial. This eliminates the need for troublesome electronic timers.

PERISTALTIC ADVANTAGE – Peristalsis occurs when the rotation of the rollers around the inside diameter of the tube housing compress and dilates the pumping tube. This eliminates diaphragms or foot valves while allowing the system to be completely self-priming. Hydrogen Peroxide can be pumped without concern about vapor lock.

EASY TUBE MAINTENANCE – Pumping tubes are easily replaced. Just set the tube in place and let it thread itself into position. Down time and maintenance costs are kept to a minimum through periodic tube replacements.

SVP Variable speed peristaltic pump with 4-20mA option.

• Polycarbonate corrosion resistant housing
• 85 GPD at 25 PSI
• 110V 50/60 Hz
• Heavy Duty DC Motor
• 4-20mA input
• 24/7 Duty Cycle
• 4 character LED display (20:1 turndown ratio)
• Manual control adjustable from 5-100%
• 4 button keypad - Up, Down, On/Off, Prime