My Cart

Jet Pump Water well

3/4HP 115/230v
Model Number
FP4022
$443.80
Flotec FP4022 Jet Pump Water well

Flotec FP4022

Jet Pump Water well

Corrosion resistant shallow well jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, have a high resistance to sand and abrasive wear and assure years of dependable service. Ideal for shallow well applications with pumping levels to 25'. Can be used in shallow well installation in 2" wells or larger. Also often used as a sprinkler pump.

  • Superior performance at depths to water of 100' or less
  • Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
  • Includes heavy-duty A.O. Smith motor and pressure regulator
  • Ready-to-install 230 volt motor - see manual for 115 volt conversion
  • Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
  • Pressure switch pre-wired with 30-50 PSI pressure setting
  • Built-in pressure regulator
  • For Shallow Well Applications: capacities up to 8 gpm at 40 PSI

simer 3105p Search FP4012 in Parts for a listing of repair kits for these pumps.

More Information
Model Number FP4022
Series Well Jet Pump
Max Flow (GPM.) 12
Max Flow GPH 720
TDH Maximum (Ft) 179
TDH Maximum (PSI) 78
Horse Power (HP) 3/4
Horsepower (IE .5, 1, 1.5, 20) 0.75000
Inlet Connection Type FNPT
Inlet (In.) 1.25
Outlet Connection Type FNPT
Outlet (In.) 0.75
Wetted Materials Polyester
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 12.2/6.1
Motor ODP
Speed (RPM.) 3450
Self Priming Yes
Max Operating Temperature (F) 110
Viscosity Water 1.00 cp 31.00 ssu
Mechanical Seal No
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Material Noryl plastic
Cord Length (Ft.) 0
Drain Yes
Port Rotation Yes
Weight (Lbs) 30.000000
Warranty (YRS.) 1
>