High Pressure Trash Pump MIG40-18K
-
Manufacturer:
-
Series (4 Models):
-
Product Name:High Pressure Trash Pump MIG40-18K
-
Model Number:607715 90281218
18HP Kohler High Pressure Trash pump
Model Number
607715 90281218
Monarch 607715 90281218
Heavy duty self priming pump of all iron construction MIG40. High
pressure semi-trash pump for irrigation, marine, pile driving,
industrial and de-watering. Engine has Electric Start & Low oil
shut off, NO fuel tank, option or customer supplied for gas engine.
FMIG-18
IMPELLER- Semi open Cast iron, non clogging, designed for water but can also handle small quantities of mud, sand, or silt up to 10% by volume
PRIMING PLUG- Enables priming, without having to disconnect the discharge piping
CHECK VALVE- Built in with threaded NPT Suction inlet, prevents Syphoning, facilitates priming.
SEAL- FKM and stainless steel with SiC ceramic faces , mechanical self lubricated, no maintenance required. Hard, siliconized graphite seal faces stand up to abrasive material found in construction and drainage applications.
CASING- Cast gray iron rugged construction large capacity for faster priming. Self Cleaning interior design prevents silt build up.
WEAR PLATE- Replaceable steel wear plate, for maximum pump efficiency
- ENGINE TYPE- Kohler
- Starter - Electric
- Low Oil Shut Off- Yes
- Size 4" X 4" FNPT
The MIG series has been widely used in the hydro seeding industry because of its ability to pump volume of solids at high pressure. 4hgg3
| Model Number | 607715 90281218 |
|---|---|
| Series | High PressureTrash Pump MIG Hydroseeder, |
| Max Flow (GPM.) | 404 |
| Max Flow GPH | 24240 |
| TDH Maximum (Ft) | 154 |
| TDH Maximum (PSI) | 67 |
| Horse Power (HP) | 18 |
| Horsepower (IE .5, 1, 1.5, 20) | 18.0000 |
| Inlet Connection Type | FNPT |
| inlet size | 4" |
| Inlet (In.) | 4 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 4 |
| Wetted Materials | Cast Iron, Steel |
| Elastomers / O-ring | FKM |
| Motor | Gas Engine |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Suction Lift (FT.) | 20 |
| Max Operating Temperature (F) | 140 |
| Viscosity | Cream 16.50 cp 100.00 ssu |
| Mechanical Seal | No |
| Mechanical Seal Face | SiC-Ceramic |
| Mechanical Seal Type | Single |
| Rotation | clockwise viewed from engine side |
| Low Oil Shutdown | Yes |
| Impeller Material | Cast Iron |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 320.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 100 Feet Of Head | 325 |
Supporting Docs
Supporting Docs
You May Be Interested In
High Pressure Trash Pump MIG30-13H
MIG 90281113
MIG 90281113
High pressure trash pump Honda engine Electric Start
