Heavy Duty Coolant Pump

The AMT Heavy Duty Industrial Coolant pump has been designed for a broad range of Industrial Commercial coolant, water curtain paint booths and recirculating applications. If you have machining lubricants and need to circulate them, these are the pumps. All oil coolant pump with extended shafts are fitted with aligning coupling between motor and shaft. Canti-lever shaft design means no bottom bearing to wear out. A Universal mounting bracket system is available for these pumps (see below)**. Watch out for other brands of similar pumps which have a 3P model prefix, they are now made in China.

Features:

• Cast Iron Casing and Column
• 1-1/2" NPT Discharge Port
• Handles Viscosities to 500 SSU
• Universal Mounting Bracket Option Available
• Maximum Temperature 200F
• Maximum Flow 67GPM
• Maximum Head 32 ft.
• Self-cleaning Semi-open stainless impeller
• Available with Single 56C motor
• 3/4 HP Totally Enclosed Fan Cooled (TEFC) motor, 1725 RPM

A Cast Iron Mounting Bracket is available for this model. The mounting brackets are designed to simplify the pump installation/removal process andexpand the application range for each pump in the line. With the bracket system, it is no longer necessary to disassemble motor from pump end for installation and removal. Simply unfasten the brackets from the tank cover and insert or remove the complete pump. The bracket system also controls the immersion depth of each pump in the line by clamping to the pump column at the most desirable position (click here). See Curve "A" for detailed pump specs. Direct replacement for 3p951