Ground Level Drainage Pump

Model Number:

LSR2.4S-61
Product Name:

Ground Level Drainage Pump
Manufacturer:

Tsurumi
Series (17 Models):

Submersible Dewatering Pumps Tsurumi

115v 62GPM 3,720GPH 2/3HP

Model Number

LSR2.4S-61

10% Off Special Price $564.00 Regular Price $627.00

Email to a Friend Price Match

Skip to the beginning of the images gallery

Tsurumi LSR2.4S-61

Tsurumi LSR2.4S-61 Low-Level Drainage Pump – 2/3 HP, 115V, 2"

The Tsurumi LSR2.4S-61 is a low-level drainage pump for removing shallow water from flat surfaces where there is no sump. It has a 2-inch discharge for higher flow than the LSC, and keeps pumping down to about 0.2 inch of water per Tsurumi's data sheet.

WHAT IT'S GOOD FOR
• Draining flat surfaces and shallow water where there is no sump
• Construction site and basement clean-up
• Residential, commercial and industrial site drainage

KEY FEATURES
• Low-level design keeps pumping in very shallow water
• Urethane semi-vortex impeller and wear plates for long life
• Dual inside mechanical seals with silicon carbide faces in an oil-filled chamber
• Top discharge, flow-through design allows extended running at very low water levels
• Built-in thermal protection and C3 ball bearings rated for a 60,000-hour B-10 life

SPECIFICATIONS
Horsepower: 2/3 HP
Power: 115V, single-phase, 60 Hz
Full-load amps: 5.9 A at 115V
Discharge: 2" NPT
Max flow: 62 GPM (3,720 GPH)
Max head: 40 ft
Max solids: 0.236"
Power cable: 32 ft
Operation: Manual
Runs continuously down to: 0.20" (about 5 mm) of water
Weight: 23 lb
Max water temperature: 104°F (40°C)

Backed by Tsurumi's limited warranty: two years.

More Information
Model Number	LSR2.4S-61
part number	ILRTDAA1
Series	Submersible Dewatering Pumps Tsurumi
Max Flow (GPM.)	62
Max Flow GPH	3720
TDH Maximum (Ft)	40
TDH Maximum (PSI)	17
Horse Power (HP)	2/3
Horsepower (IE .5, 1, 1.5, 20)	0.6600
Outlet Connection Type	MNPT
Outlet (In.)	2
Wetted Materials	PolyPro-GF
Elastomers / O-ring	Urethane
Voltage (V)	115
Voltage (Range)	110-120
Phase (Ø)	Single (1)
Motor Frequency	60
Motor Amps (A)	6.1
Motor	Hermetically Sealed
Speed (RPM.)	3450
Max Operating Temperature (F)	104
Max Particle Size (In)	0.24
Viscosity	Milk 3.20 cp 40.00 ssu
Stages	1
Length (In.)	11.97
Mechanical Seal Face	SiC
Mechanical Seal Type	Double
Motor Bearings	Ball
Other	Max. Diameter (inch) : 7 5/16 ,Max. Height (inch): 11 15/16. ETL Certified to UL CSA standards for submersible construction pumps. For smaller pump with built in back flow check valve see LSC1.4S-61. Starting current 12.5A.
Cord Size	16/3
Cord Length (Ft.)	32
Duty	Continuous
Drain	No
Port Rotation	Yes
Country of Manufacture	Japan
Weight (Lbs)	34.000000
Warranty (YRS.)	2
GPM Of Water At 15 Feet Of Head	50
GPM Of Water At 20 Feet Of Head	42
GPM Of Water At 30 Feet Of Head	23

As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.