My Cart

Commercial Duty 24v DC

24v
Model Number
18670-0943
$407.00
Jabsco 18670-0943 Commercial Duty 24v DC

Jabsco 18670-0943

Commercial Duty Water Puppy has 25% more flow than the standard model and a heavy duty PMDC 24 vdc motor. For general transfer pumping where self-priming, 8 gpm flow and debris tolerance are required. Oil-resistant nitrile impeller is standard. Do not pump gasoline or other flammable liquids. DO NOT RUN DRY.

This is the pump you've been searching for! This is like the pump used in most factory wakeboard ski boat ballast systems. This pump is a 24 volt, reversible, high volume, ballast system necessity. Stop tossing pumps over the side of the boat, and enjoy a clean custom ballast system. Jabsco 18220-0121. 15 amp fuse. Ports are dual size, threaded internally and a external 1" hose barb.

Complies with USCG 183.410 marine ignition protection.

Our most common primer pump. Pump has a dry prime lift of 6ft. and a lift to 20ft. when primed. Great for priming other larger water pumps. Permanent magnet type, fully enclosed stainless steel shaft, ball type shaft bearing. 3" high, 6-7/8" long, 4-3/4" wide

More Information
Model Number 18670-0943
Series 18670 Commercial Duty DC
Max Flow (GPM.) 8
Max Flow GPH 480
TDH Maximum (Ft) 20
TDH Maximum (PSI) 9
Inlet Connection Type FNPT
inlet size Less than 1"
Inlet (In.) 0.5
Outlet Connection Type FNPT
Outlet (In.) 0.5
Wetted Materials Bronze
Elastomers / O-ring Buna-Nitrile
Voltage (V) 24DC
Voltage (Range) 12/24/36 VDC
Motor TENV
Speed (RPM.) 2850
Self Priming Yes
Suction Lift (FT.) 6
Max Operating Temperature (F) 180
Viscosity Cream 16.50 cp 100.00 ssu
Length (In.) 6.880000
Mechanical Seal LIP SEAL
Mechanical Seal Type Single
Other permanent magnet motor with ball bearings.
Drain Yes
Port Rotation Yes
Weight (Lbs) 6.000000
Warranty (YRS.) 1
>