CI Shallow well Pump 1/2
-
Manufacturer:
-
Series (3 Models):
-
Product Name:CI Shallow well Pump 1/2
-
Model Number:FP4105
Flotec FP4105
Cast Iron shallow well jet pump water pump. 1/2 HPShallow Well
Pump, Motor Enclosure TEFC, Pump Material Cast Iron, 1/2 HP,
Voltage 115/230, Suction Lift 25 Ft., Max. Case Pressure 145 PSI,
Shut Off 63 PSI, Motor Type Capacitor Start, Max. Operating Temp.
140 F, Length 19 In., Width 10 7/8 In., Height 7 3/4 In.
FLOW at 10' LIFT and 40 PSI: 6.5 GPM (24.6 LPM) * Superior
performance at depths to water of 25' or less. * Rugged, heavy-duty
cast iron pump housing. * Ready-to-install 115 volt motor - see
manual for 230 volt conversion. * Pressure switch is pre-wired with
30-50 PSI setting for use with water pressure or storage tank.
| Model Number | FP4105 |
|---|---|
| Series | CI Shallow Well Jet pump |
| Max Flow (GPM.) | 8 |
| Max Flow GPH | 480 |
| TDH Maximum (Ft) | 154 |
| TDH Maximum (PSI) | 63 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.5000 |
| Inlet Connection Type | FNPT |
| inlet size | 1" |
| Inlet (In.) | 1 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1 |
| Wetted Materials | CI-Plastic |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 56J thrd |
| Self Priming | Yes |
| Suction Lift (FT.) | 25 |
| Max Operating Temperature (F) | 120 |
| Viscosity | Water 1.00 cp 31.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Other | Carton size 19" x 10.82" x 10.5" |
| Impeller Material | Noryl |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 53.000000 |
| Warranty (YRS.) | 1 |
>
You May Be Interested In
