Commercial Duty 24v DC
-
Model Number:
18670-0943
-
Product Name:Commercial Duty 24v DC
-
Manufacturer:
-
Series (2 Models):
24v
Model Number
18670-0943
$407.00
Jabsco 18670-0943
Commercial Duty Water Puppy has 25% more flow than the standard
model and a heavy duty PMDC 24 vdc motor. For general transfer
pumping where self-priming, 8 gpm flow and debris tolerance are
required. Oil-resistant nitrile impeller is standard. Do not pump
gasoline or other flammable liquids. DO NOT RUN DRY.
This is the pump you've been searching for! This is like the pump used in most factory wakeboard ski boat ballast systems. This pump is a 24 volt, reversible, high volume, ballast system necessity. Stop tossing pumps over the side of the boat, and enjoy a clean custom ballast system. Jabsco 18220-0121. 15 amp fuse. Ports are dual size, threaded internally and a external 1" hose barb.
Complies with USCG 183.410 marine ignition protection.
Our most common primer pump. Pump has a dry prime lift of 6ft. and a lift to 20ft. when primed. Great for priming other larger water pumps. Permanent magnet type, fully enclosed stainless steel shaft, ball type shaft bearing. 3" high, 6-7/8" long, 4-3/4" wide
Model Number | 18670-0943 |
---|---|
Series | 18670 Commercial Duty DC |
Max Flow (GPM.) | 8 |
Max Flow GPH | 480 |
TDH Maximum (Ft) | 20 |
TDH Maximum (PSI) | 9 |
Inlet Connection Type | FNPT |
inlet size | Less than 1" |
Inlet (In.) | 0.5 |
Outlet Connection Type | FNPT |
Outlet (In.) | 0.5 |
Wetted Materials | Bronze |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 24DC |
Voltage (Range) | 12/24/36 VDC |
Motor | TENV |
Speed (RPM.) | 2850 |
Self Priming | Yes |
Suction Lift (FT.) | 6 |
Max Operating Temperature (F) | 180 |
Viscosity | Cream 16.50 cp 100.00 ssu |
Length (In.) | 6.880000 |
Mechanical Seal | LIP SEAL |
Mechanical Seal Type | Single |
Other | permanent magnet motor with ball bearings. |
Drain | Yes |
Port Rotation | Yes |
Weight (Lbs) | 6.000000 |
Warranty (YRS.) | 1 |
>