Search results for: '4 ci threaded flange sf400tfbs'
-
Oberdorfer Pumps
10 GPM CI GEAR PUMP & PED
10GB1111S
$1,013.00Medium duty CI gear pump with relief valve and pedistal for long coupling. Mechanical sealed, bronze bearings. CW rotation.b>Features:
- Shafts: Ground and polished steel.
- Helical Gears: For quiet running.
- Housing: Of close grain cast iron. Three...
-
Oberdorfer Pumps
18 GPM CI GEAR PUMP & PED
18GB1111S
$1,226.00Medium duty CI gear pump with relief valve and pedistal for long coupling. Mechanical sealed, bronze bearings. CW rotation.b>Features:
- Shafts: Ground and polished steel.
- Helical Gears: For quiet running.
- Housing: Of close grain cast iron. Three...
-
Pulsafeeder
Metering Pump 3 GPD/300 PSI
LPK2SA-PTC1
$1,791.74The Series E Plus offers manual control over stroke length andstroke rate as standard. 3 GPD / 0.47 LPH / .125 GPH- 20 flow/pressure envelops
- 100:1 turn down ratio
- Auto-off-Manual selection switch with indicator lights
- Built in fuse
- Clear h...
Manual Learn More -
Pulsafeeder
Metering Pump 192 GPD/50 PSI
LPK7SA-PTC3
$2,238.56The Series E Plus offers manual control over stroke length and stroke rate. Not good with chlorine, use PVC pump head.- 20 flow/pressure envelops
- 100:1 turn down ratio
- Auto-off-Manual selection switch with indicator lights
- Built in fuse
- Cle...
PP 8GPH Learn More -
Standard
Batch Control Sys. PP-27
BC-280-PP-27
$3,724.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300 cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT threa...
-
Standard
Batch Control Sys. PP-39
BC-280-PP-39
$3,812.00Batch control pump system. Batch Control System (BCS) is engineered to control, measure and dispense preset volumes of liquid from drums, IBCç—´, plating tanks or any large storage vessel. The BCS can be used in an industry where batching, che... -
Standard
Batch Control Sys. PP-47
BC-280-PP-47
$3,825.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300 cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT threa...
-
Standard
Batch Control Sys. PP-60
BC-280-PP-60
$4,014.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300 cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT threa...
-
Standard
Batch Control Sys. PP-72
BC-280-PP-72
$4,148.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thread...
-
Standard
Batch Control Sys. PP-27
BC-ENC-PP-27
$3,964.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thre...