18 GPM CI GEAR PUMP & PED
-
Model Number:
18GB1111S
-
Product Name:18 GPM CI GEAR PUMP & PED
-
Manufacturer:
-
Series (2 Models):
Model Number
18GB1111S
$1,593.80
Oberdorfer 18GB1111S
Medium duty CI gear pump with relief valve and pedistal for long
coupling. Mechanical sealed, bronze bearings. CW rotation.
b>Features:
- Shafts: Ground and polished steel.
- Helical Gears: For quiet running.
- Housing: Of close grain cast iron. Three section double weled design insures alignment, efficiency and ease of field service.
- Bearings: Full face thrust bearings in bronze.
- Seals: Mechanical seal of Buna
- Pump is self priming due to close manufacturing tolerances.
- Suction lifts up to 20 feet based on fuel oil 70ï½°F.
- Optional extended shaft available to accommodate separate outboard bearing for pulley drive.
For presssure, flow rates and required HP at various viscosities, click performance graph.
| Model Number | 18GB1111S |
|---|---|
| part number | 18GB1111S |
| Series | GearIron Gear Pump |
| Max Flow (GPM.) | 18 |
| Max Flow GPH | 1080 |
| TDH Maximum (Ft) | 250 |
| TDH Maximum (PSI) | 108 |
| Inlet Connection Type | FNPT |
| inlet size | 1 ¼" |
| Inlet (In.) | 1.25 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.25 |
| Wetted Materials | Bronze, Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Self Priming | Yes |
| Suction Lift (FT.) | 20 |
| Max Operating Temperature (F) | 225 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | Steel |
| Length (In.) | 14.010000 |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Other | Rotation is clockwise when facing shaft end of pump. Required HP is determined by flow, pressure and viscosity of liquid. Not for propane. |
| Drain | No |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 34.000000 |
>
