Search results for: 'parts march pump parts'

Mechanically-activated switch designed for direct control of pumps up to 1/2 HP at 120 VAC. 15VM1WP

This mechanically-activated pump switch is designed to operate in non-potable water and sewage applications with ...

Mechanically-activated switch designed for direct control of pumps up to 1 HP at 240 VAC/1. 20VM2WP

This mechanically-activated pump switch is designed to operate in non-potable water and sewage applications...

The Pump Alternator Control and Alarm System is ideal for those wishing to maintain two primary pumps in the same pit. DVSA alternator lengthens the life of both pumps by alternating usage, running one pump at a time. If your pit water conditions ...

SJE Vertical Master Pump Level Switch 115v.

Mechanically-activated switch designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 115 VAC. 20VM1WP

This mechanically-activated pump switch is designed to operate in non-potable wat...

SJE MICROMASTER® PLUS WS Pump Switch 

Heavy duty pump level control float switch includes piggy-back plug, 20FT cord.

Mechanically-activated, wide-angle pump switch 20mmpd1wpws

specifically designed as a mechanical alternative to the mercury-ac...

HydroCheck Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits. They are particularly useful when the sump pit is very large and may take more than 90 seconds to empty, or the water table is unusually high an...

High Temperature SS pump float switch.

Pump Duty Mercury activated narrow angle float switch for automatic level control of sump pumps and other pump types. Rated 10 amp@ 120 VAC 1/2hp SPST. 221 F max. Use for pump down, normally open contact, ap...

Deluxe Controller: Deluxe Dual Float Controller and vertical mechanical float switch. VSC2

The Controller monitors pump and power conditions, and sounds an alarm when a problem is detected. The warning signals are described below. In addition,it ...

HydroCheck HC8000 Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits. They are particularly useful when the sump pit is very large and may take more than 90 seconds to empty, or the water table is unusually ...

Dual Float Controller DFC1 The Dual Float and Controller is included with the S2 series pumps. It turns on the pump when water lifts the float switch 1/4", and runs the pump for an additional 10 seconds after the float drops, to completely empty t...