Bronze Rotary Gear Pump End
-
Model Number:
N61K10G-01
-
Product Name:Bronze Rotary Gear Pump End
-
Manufacturer:
-
Series (5 Models):
Model Number
N61K10G-01
$233.00
Oberdorfer N61K10G-01
PUMP END ONLY
This Bronze Rotary Gear Pump is popular among OEM users. It is a diesel fuel transfer pump featuring an all bronze design and 303 stainless steel shaft.
Special Features:
- Bronze Body
- Helical Gears for Quiet Operation
- Self-lubricating Carbon Bearings
- Buna N Lip Seal
- Carbonator Motor Mount
Bronze pumps are suitable for water, oil, and mild chemicals in the pH-range from 4-10. Viscous liquids may be handled with carbonator pumps up to a viscosity of 300 SSU. Higher viscosities require a pump speed lower than 1725 RPM, which is currently not available in carbonator motors.
Liquids containing abrasives, solids, powders or pigments are highly detrimental to pump life and mut be avoided.
The carbonator motor mounting uses a circular clamp, similar to a hose clamp, as means of attaching the pump to a specially machined hub on the motor.
Model Number | N61K10G-01 |
---|---|
part number | N61K10G-01 |
Series | Bronze Rotary Gear Pumps |
Max Flow (GPM.) | 2 |
Max Flow GPH | 120 |
TDH Maximum (Ft) | 231 |
TDH Maximum (PSI) | 100 |
HP Required | .33 |
Inlet Connection Type | FNPT |
inlet size | Less than 1" |
Inlet (In.) | 0.38 |
Outlet Connection Type | FNPT |
Outlet (In.) | 0.38 |
Wetted Materials | Bronze |
Elastomers / O-ring | Buna-Nitrile |
Speed (RPM.) | 1725 |
Self Priming | Yes |
Suction Lift (FT.) | 20 |
Max Operating Temperature (F) | 140 |
Viscosity | Vegetable Oil 34.60 cp 200.00 ssu |
Shaft | 304SS |
Length (In.) | 5.600000 |
Mechanical Seal | ROTARY LIP |
Mechanical Seal Type | Single |
Other | Shaft rotation clockwise from shaft end. Reversingthe motor rotation will reverse the ?in? and ?out? ports and also requires changing the relief valve location. The relief valve is always on the discharge side in this pump series. The factory pressure setting is 50 PSIG. To increase pressure, turn the relief valve adjusting screw in a clockwise direction. For a first start-up, the pump should be primed to avoid dry running. Gear pumps are self-priming, but a foot valve with strainer is recommended at the beginning of the suction line. |
Drain | No |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 30.000000 |