5 chamber diaphragm pump
-
Manufacturer:
-
Series (21 Models):
-
Product Name:5 chamber diaphragm pump
-
Model Number:5512-1E12-J586
Model Number
5512-1E12-J586
$199.00
Aquatec 5512-1E12-J586
550 Series Super Flow Pump: Reverse Osmosis System Pump, High
Powered RO / DI Reverse Osmosis Pump
OPERATION: The 550 pumps can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. Anintegral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motors are available in various configurations from 12 VDC to 230 VAC. Transformersor DC power supplies are optional and must be ordered separately if applicable. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. FITTINGS: The standard pump head has 1/2 NPT female ports. Includes 6FT power cord and plug.The pump can be ordered with a .750" port opening that accepts "quick connect" beverage style O-ring barb fittings, for use with 5/8" (16 mm) ID tubing. See model designation
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
Click here for strainers.
| Model Number | 5512-1E12-J586 |
|---|---|
| Series | Demand Pump Electric Diaphragm 550 |
| Max Flow (GPM.) | 3 |
| Max Flow GPH | 180 |
| TDH Maximum (Ft) | 138 |
| TDH Maximum (PSI) | 60 |
| TDH BEP (FT.) | 69.300000 |
| Inlet Connection Type | FNPT |
| inlet size | Less than 1" |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | EPDM |
| Diaphragm | Santoprene |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 10 |
| Max Operating Temperature (F) | 145 |
| Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
| Length (In.) | 9.000000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | 6' LINE CORD. Pressure switch is adjustable within certain range 30 - 70 psi. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 8.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
