5 chamber diaphragm pump
-
Manufacturer:
-
Series (21 Models):
-
Product Name:5 chamber diaphragm pump
-
Model Number:5511-1C12-J576
Model Number
5511-1C12-J576
$199.00
Aquatec 5511-1C12-J576
550 Series Super Flow Pump: Reverse Osmosis System Pump, High
Powered RO/DI Reverse Osmosis Pump
OPERATION: The 550 pumps can draw water from a holding tank and pressurize it, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. Anintegral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Cord with plug. MOUNTING:A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. FITTINGS: The pump with a 1/2 NPT female ports.
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications*Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
Click here for strainers.
| Model Number | 5511-1C12-J576 |
|---|---|
| Series | Demand Pump Electric Diaphragm 550 |
| Max Flow (GPM.) | 4 |
| Max Flow GPH | 240 |
| TDH Maximum (Ft) | 103 |
| TDH Maximum (PSI) | 45 |
| Inlet Connection Type | FNPT |
| inlet size | Less than 1" |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | Nylon |
| Elastomers / O-ring | EPDM |
| Diaphragm | Santoprene |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 50/60 |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 7 |
| Max Operating Temperature (F) | 140 |
| Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
| Length (In.) | 9.000000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | includes 6 ft. cord and plug. Pressure switch is adjustable within certain range. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 8.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
