My Cart

5 chamber diaphragm pump

4GPM 80PSI 115v
Model Number
5502-2GC1-B526
$199.00
Aquatec 5502-2GC1-B526 Demand Pump 5 chamber diaphragm pump

Demand Pump: Spraying, Ag and cleaning solutions. Viton seals.

OPERATION: The 550 pumps can draw water from a holding tank and pressurize it, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. An integral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motors are available in various configurations from 12 VDC to 230 VAC. Transformers or DC power supplies are optional and must be ordered separately if applicable.Standard termination are 12" Long 14 AWG lead wires with a stripped end,connectors or cords with plugs are optional. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and included at no extra cost. The pump may be mounted in any position. FITTINGS: The standard pump head has 3/4" QD ports which accept hose barb, NPT or garden hose as options.The pump can be ordered with a .750" port opening that accepts "quick connect" beverage style O-ring barb fittings, for use with 5/8" (16 mm) ID tubing. See model designation

*Geolast- nitrile based thermoplastic elastomer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastomer and is resistant to mild acids, some solvents and bases

 

More Information
Model Number 5502-2GC1-B526
Series Demand Pump Electric Diaphragm 550
Max Flow (GPM.) 4
Max Flow GPH 240
TDH Maximum (Ft) 184
TDH Maximum (PSI) 80
Inlet Connection Type Quick connect
inlet size Less than 1"
Inlet (In.) 0.7
Outlet Connection Type Quick connect
Outlet (In.) 0.7
Wetted Materials PolyPro-GF
Elastomers / O-ring Viton
Diaphragm Santoprene
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 50/60
Motor TENV
Self Priming Yes
Suction Lift (FT.) 10
Max Operating Temperature (F) 145
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Length (In.) 9.000000
Mechanical Seal No
Mechanical Seal Type Double
Other Pressure switch is adjustable within certain range 70 psi. Motor is a permanent magnet - brush type with ball bearings. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. No power cord.
Drain No
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 8.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
pdf
(Size: 255.71 KB) Extension: pdf