My Cart

2E-NYS Solvent pump

Model Number
Little Giant 502020 Acid pump 2E-NYS Solvent pump
Acid pump

Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. 6 foot power cord without plug has "Master Builders" conduit fitting at pump housing for mounting. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Thermally protected.

  • Oil-filled Aluminum Housing
  • Nylon volute & impeller
  • Conduit fitting for mounting
  • Submerged use only in parts washers
  • Double-lip Viton shaft seal
  • For use with UL (PJQU) solvents
  • 300 GPH @ 1
  • 6 foot cord, no plug
  • Thermally protected
More Information
Model Number 502020
Series solvent acid pumps
Max Flow (GPM.) 5
Max Flow GPH 300
TDH Maximum (Ft) 11
TDH Maximum (PSI) 5
Outlet Connection Type MNPT
Outlet (In.) 0.25
Wetted Materials Aluminum, Nylon
Elastomers / O-ring Viton
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Speed (RPM.) 1725
Self Priming No
Max Operating Temperature (F) 120
Viscosity Water 1.00 cp 31.00 ssu
Mechanical Seal LIP
Mechanical Seal Type Single
Other 6 foot power cord (without plug)
Drain Yes
Port Rotation Yes
Weight (Lbs) 5.000000
Warranty (YRS.) 1