12v water pump demand
-
Model Number:
5852-7E12-0664
-
Product Name:12v water pump demand
-
Manufacturer:
-
Series (9 Models):
1GPM 60psi 12v
Model Number
5852-7E12-0664
$281.78
Aquatec 5852-7E12-0664
12v water pump. 550 Series Super Flow Pump: These pumps are
specifically designed for mobile low flow or low voltage
applications such as water systems, pesticides and fertilizers. 12
VDC. Pressure switch set at 60 PSI. Connections are 1/4 " John
Guest fittings, push to connect.
OPERATION: The 550 pumps can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. Anintegral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motor is 12 VDC.Standard termination are 12" Long 14 AWG lead wires with a stripped end,connectors or cords with plugs are optional. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. The hole pattern matches those of Flojet and ShurFlo brands for easy drop in replacement. The pump can be ordered with a .750" port opening that accepts "quick connect" beverage style O-ring barb fittings, for use with 5/8" (16 mm) ID tubing. See model designation
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
| Model Number | 5852-7E12-0664 |
|---|---|
| Series | 580 Water pump Electric Diaphragm |
| Max Flow (GPM.) | 1 |
| Max Flow GPH | 60 |
| TDH Maximum (Ft) | 138 |
| TDH Maximum (PSI) | 60 |
| inlet size | Less than 1in |
| Inlet (In.) | 0.25 |
| Outlet (In.) | 0.25 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | Geolast |
| Diaphragm | Santoprene |
| Voltage (V) | 12DC |
| Voltage (Range) | 12/24/36 VDC |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 11 |
| Max Operating Temperature (F) | 145 |
| Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
| Length (In.) | 9.000000 |
| Mechanical Seal | No |
| Other | Pressure switch is adjustable within certain range 30 - 70 psi. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. 4 amps @ 60PSI. NOT for use with flammable liquids. |
| Duty | 20 minute duty cycle |
| Drain | No |
| Port Rotation | No |
| Country of Manufacture | United States |
| Weight (Lbs) | 7.000000 |
Supporting Docs
Supporting Docs
