My Cart

115v Electric Oil Transfer pump

  • Manufacturer:
  • Series (8 Models):
  • Product Name:
    115v Electric Oil Transfer pump
  • Model Number:
    OP115 260101
OBS
Model Number
OP115 260101
$800.00
PBL_graco  Oil pump

Obsolete see 25T819

The APEX PBL oil transfer pumps are designed specifically to transfer bulk oils and hydraulic fluids, motor oil, gear oil, cutting oil, antifreeze. Pump petroleum- and synthetic-based lubricants. Larger horsepower electric motors with a smaller displacement gear pump assure adequate power to pump viscous fluids at low temperatures. The pump kit mounts on a standard barrel and comes complete with pumping unit, hose, nozzle, bung adapter and suction pipe. Using a barrel dolly with the Graco Apex oil transfer pump gives an efficient, clean portable transfer system for servicing farm machinery and large equipment. The pump can also be used for transferring used oil. A Opt. suction pipe screen to filter out large contaminates must be used when pumping used oil. Meters available as a accessory.

Model 260102 is intended for use with fluid viscosities of 1000 centistokes (5000 ssu) or less. For fluids with viscosities greater than 1000 centistokes use pump model 260101.)

Features:

  • Electric motor driven metal gear type pump
  • Self priming, positive displacement design
  • Mounts directly on barrel with adapter supplied
  • 115 AC models
  • Pumps high viscosity fluids at 4 gallons per minute
  • Built in 65 PSI bypass valve and on-off switch
  • AC model has built in 30 inch three prong power cord
  • 1/2 horsepower motors supply the necessary power to pump viscous fluids
  • Kit comes complete with suction pipe, 8 foot hose, nozzle and bung adapter

Repair kit 260293. Key Applications

  • Servicing farm machinery
  • Transfer bulk oil
  • Transfer used oil

Key Materials

  • Synthetic Oil
  • Petroleum Based Oils
  • Hydraulic Fluids
  • Used Oil

CAUTION: Do not pump flammable fluids.

More Information
Model Number OP115 260101
Series Oil Pumps Electric PBL
Max Flow (GPM.) 4
Max Flow GPH 240
TDH Maximum (Ft) 150
TDH Maximum (PSI) 65
Horse Power (HP) 3/4
Horsepower (IE .5, 1, 1.5, 20) 0.7500
Inlet Connection Type FNPT
inlet size 1"
Inlet (In.) 1
Outlet Connection Type FNPT
Outlet (In.) 0.75
Wetted Materials Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor ODP
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 3
Max Operating Temperature (F) 190
Viscosity Catsup 3000.00 cp 20000.00 ssu
Mechanical Seal LIP SEAL
Mechanical Seal Type Single
Other Power cord: 30 inch 3 prong. Motor has on / off switch. Hose size: 8 foot, 3/4 diameter. If used oil or other dirty liquid use suction screen 260306. Units measure 6wx8Hx12?L. Metal gears. The motors are drip proof rated at 3/4 hp. The motors have sealed bearings and require minimal maintenance. All models come with hose, nozzle, 34 in. (864 mm) suction tube assembly, and bung adapter
Cord Length (Ft.) 30 in.
Drain No
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 27.000000
Warranty (YRS.) 2

Supporting Docs

Supporting Docs
pdf
(Size: 1.12 MB) Extension: pdf