115v Electric diaphragm pump
Series (9 Models):
Product Name:115v Electric diaphragm pump
OPERATION: The electric diaphragm pump can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. Anintegral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motor has 6ft line cord and plug 115v. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. The hole pattern matches those of Flojet and ShurFlo brands for easy drop in replacement. FITTINGS: The standard pump head has 3/8" JG female ports.
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
Click here for strainers.Big electric diaphragm pumps.
|Series||580 Water pump Electric Diaphragm|
|Max Flow (GPM.)||1|
|Max Flow GPH||60|
|TDH Maximum (Ft)||138|
|TDH Maximum (PSI)||60|
|inlet size||Less than 1"|
|Elastomers / O-ring||Geolast|
|Phase (Ø)||Single (1)|
|Suction Lift (FT.)||11|
|Max Operating Temperature (F)||145|
|Viscosity||SAE 30 oil 352.00 cp 2000.00 ssu|
|Mechanical Seal Type||Double|
|Other||Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve.
NOT for use with flammable liquids.