My Cart

1 HP JSC Shallow Well Pump

1HP Stainless Jet pump 115/230v
Model Number
JSC 10F16P
Pearl Calpeda - JSC 05F16P: ½ JSC  Pump

Pearl Calpeda JSC 10F16P

1 HP JSC10 Shallow Well Pump Features

An exclusive diffuser jet design with flow control device provides for compact construction, fast self-priming capability and low noise.

Reliable with new design features, the JSC is more robust and forgiving when temporary abnormal operating conditions may exist.

The JSC Pearl is smaller than conventional pumps of a similar type, allowing for installation in restricted spaces and providing for easier retrofit applications.

Fast air evacuation reduces the risk of air-pockets developing at the mechanical seal preventing the danger of seal failure due to a lack of flushing and cooling.

The new diffuser and flow control device guide the fluid from the impeller into the central part of the pump casing, reducing turbulence and velocity, with effective use of the surrounding liquid in dampening the noise of flow.


  • For drawing water out of a well.
  • For lifting water containing air or other gases.
  • For increasing water pressure from flooded suction applications.
  • As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).
  • For garden use.
  • For clean liquids or slightly dirty surface water.
  • For washing with a jet of water.


  • Liquid temperature: 32 °F to 95 °F.
  • Ambient temperature up to 104 °F.
  • Maximum permissible pressure in the pump casing: 116 psi.
  • Continuous duty.
More Information
Model Number JSC 10F16P
Series Self Priming Jet Pumps
Max Flow (GPM.) 22
Max Flow GPH 1320
TDH Maximum (Ft) 167
TDH Maximum (PSI) 73
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1
Inlet Connection Type FNPT
Inlet (In.) 1
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials 304SS, Brass
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 13.6 /7
Motor TEFC
Speed (RPM.) 3450
Self Priming Yes
Max Operating Temperature (F) 104
Max Particle Size (In) 0.06
Viscosity Water 1.00 cp 31.00 ssu
Mechanical Seal Face Carbon-ceramic
Other 304SS body. Maximum permissible pressure in the pump casing: 116 psi.
Impeller Material Brass, closed
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation No
Country of Manufacture Italy
Weight (Lbs) 26.000000