1.5 HP JSC Shallow Well Pump
-
Manufacturer:
-
Series (7 Models):
-
Product Name:1.5 HP JSC Shallow Well Pump
-
Model Number:JSCQ 15C16P
Pearl Calpeda JSCQ 15C16P
1.5 HP JSCQ15 Shallow Well Pump Features
An exclusive diffuser design with flow control device provides for compact construction, fast self-priming capability and low noise.
Reliable with new design features, the JSC is more robust and forgiving when temporary abnormal operating conditions may exist.
Pearl JSC is smaller than conventional pumps of a similar type, allowing for installation in restricted spaces and providing for easier retrofit applications.
Fast air evacuation reduces the risk of air-pockets developing at the mechanical seal preventing the danger of seal failure due to a lack of flushing and cooling.
The new diffuser and flow control device guide the fluid from the impeller into the central part of the pump casing, reducing turbulence and velocity, with effective use of the surrounding liquid in dampening the noise of flow. Glycerin filled SS Pressure gage. Standard switch is 30-50psi but can be supplied with a 40-60psi switch.
APPLICATIONS
- For drawing water out of a well.
- For lifting water containing air or other gases.
- For increasing water pressure from flooded suction applications.
- As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).
- For garden use.
- For clean liquids or slightly dirty surface water.
- For washing with a jet of water.
OPERATING CONDITIONS
- Liquid temperature: 32 °F to 95 °F.
- Ambient temperature up to 104 °F.
- Maximum permissible pressure in the pump casing: 116 psi.
- Continuous duty.
Model Number | JSCQ 15C16P |
---|---|
Series | Self Priming Jet Pumps |
Max Flow (GPM.) | 25 |
Max Flow GPH | 1500 |
TDH Maximum (Ft) | 189 |
TDH Maximum (PSI) | 82 |
Horse Power (HP) | 1 1/2 |
Horsepower (IE .5, 1, 1.5, 20) | 1.5 |
Inlet Connection Type | FNPT |
Inlet (In.) | 1.25 |
Outlet Connection Type | FNPT |
Outlet (In.) | 1 |
Wetted Materials | 304SS, Brass |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 230 |
Voltage (Range) | 220-240 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor Amps (A) | 10.6 |
Motor | TEFC |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Max Operating Temperature (F) | 104 |
Max Particle Size (In) | 0.06 |
Viscosity | Water 1.00 cp 31.00 ssu |
Shaft | 304SS |
Mechanical Seal Face | Carbon-ceramic |
Other | 304SS body. Maximum permissible pressure in the pump casing: 116 psi. |
Impeller Material | Brass, closed |
Cord Length (Ft.) | 0 |
Duty | Continuous |
Drain | Yes |
Port Rotation | No |
Country of Manufacture | Italy |
Weight (Lbs) | 41.000000 |
Warranty (YRS.) | 2 |