Water Booster Pump

Model Number:

HP7C-02
Product Name:

Water Booster Pump
Manufacturer:

Sta-Rite
Series (37 Models):

HP HPS High Pressure Booster Pump

115/230v 1/2HP

Model Number

HP7C-02

Specifications

25% Off Special Price $1,504.50 Regular Price $2,006.00

Email to a Friend Price Match

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sta-Rite HP7C-02

This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.

Applications:
- Car wash
- Filtration and reverse osmosis
- Residential, commercial or agricultural pressure washing
- Booster and spray systems
- HVAC
- General purpose pumping
Max. Inlet Pressure: 80 PSI
Max. Working Pressure: 315 PSI
Diffuser: Polycarbonate
Heavy-Duty ball bearings: shielded, permanently lubricated bearings.
Dustproof Cover: all electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate

More Information
Model Number	HP7C-02
Series	HP HPS High Pressure Booster Pump
Max Flow (GPM.)	12
Max Flow GPH	720
TDH Maximum (Ft)	340
TDH Maximum (PSI)	147
Horse Power (HP)	1/2
Horsepower (IE .5, 1, 1.5, 20)	0.5000
Inlet Connection Type	FNPT
inlet size	Less than 1"
Inlet (In.)	0.75
Outlet Connection Type	FNPT
Outlet (In.)	0.75
Wetted Materials	Acetal-Delrin, CI-Plastic
Elastomers / O-ring	Buna-Nitrile
Voltage (V)	115/230
Voltage (Range)	110-120/220-240
Phase (Ø)	Single (1)
Motor Frequency	60
Motor	ODP
Speed (RPM.)	3450
Self Priming	No
Suction Lift (FT.)	15
Max Operating Temperature (F)	140
Viscosity	Water 1.00 cp 31.00 ssu
Stages	9
Shaft	304SS
Length (In.)	24.000000
Mechanical Seal Face	Carbon-ceramic
Mechanical Seal Type	Single
Other	Self priming to 15FT with foot valve.
Drain	No
Weight (Lbs)	50.000000
Warranty (YRS.)	1