Vertical Deep Well Jet Pump
-
Manufacturer:
-
Series (11 Models):
-
Product Name:Vertical Deep Well Jet Pump
-
Model Number:FP4432
Model Number
FP4432
$866.15
Flotec FP4432
Vertical deep well jet pump can be used in 4" diameter or larger wells up to 260', or in 2" diameter wells up to 180'. The multi-stage is recommended when water depths exceed 50' or when more water is needed at shallow well depths than conventional jet pumps..
- Superior performance at depths to water of 50' or more
- Capacities up to 12 GPM at 50 PSI
- Heavy-duty motor
- Ready-to-install 230 volt motor- see manual for 115v conversion
- Pressure switch pre-wired with 40-60 Psi pressure setting
- In Deep Well with 4" diameter casing or larger. Pipe size required: 1-1/4" suction, 1" drive, 1" discharge. Purchase Jet Package FP4800 4" Double Pipe Jet Kit sold( separately (click here)
- In Deep Well with 2" diameter casing. Pipe size required: 1-1/4" suction, 1" drive, 1" discharge. Purchase Jet Package FP4830 2" Single Pipe Jet Kit for vertical piping or FP4840 2" Single pipe Jet kit for Convertible pumps & horizontal piping - sold separately (click here)
| Model Number | FP4432 |
|---|---|
| Series | Well Jet Pump |
| Max Flow (GPM.) | 12 |
| Max Flow GPH | 720 |
| TDH Maximum (Ft) | 115 |
| TDH Maximum (PSI) | 50 |
| Horse Power (HP) | 1 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.0000 |
| Inlet Connection Type | FNPT |
| inlet size | 1 ¼" |
| Inlet (In.) | 1.25 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | ODP |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 120 |
| Viscosity | Water 1.00 cp 31.00 ssu |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Drain | Yes |
| Weight (Lbs) | 65.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
