Vertical Coolant Pump 15"
-
Manufacturer:
-
Series (16 Models):
-
Product Name:Vertical Coolant Pump 15"
-
Model Number:HP7.515HB-F 7.5
7.5HP 230/460v
Graymills HP7.515HB-F 7.5
Graymills pumps are typically found on OEM machine tool equipment
and are thus well suited for replacement or retrofit machine tool
pumping applications. These pumps can also be used on other
industrial applications requiring a vertical cast iron or stainless
pump.
HP Series pumps are designed for reliable, heavy duty, high flow pumping of industrial solvents, slurries, abrasives, and other fluids. Interchangeability of motors and impellers allows you to specify the combination which best meets your needs.
Pump performance can be varied by specifying a different motor and impeller size. The graph as the right allows you to determine the horsepower/impeller combination which will handle your operating requirements. Curves 1 thru 4 identify the pump performance for each of 4 impeller options (A, B, C, D). Diagonal lines express horsepower (HP). To use the chart, locate your required operating point (intersection GPM & TDH). If the operating point is between two curves, select the higher of the two. The required HP will be shown by the first diagonal line to the right of the operating point.
All models: 230/460V, 60/50 Hz, 3 Ph motors. 2-1/2” NPT horizontal discharge. Maximum viscosity: 300 SSU.B Length Impeller Size (Dia). 5” (A) 5-1/2” (B) 6” (C ) 6-1/2” (D)5 HP MODELS15” HP515HA-F HP515HB-F HP515HC-F 24” HP524HA-F HP524HB-F HP524HC-F 7.5 HP MODELS15” HP7.515HP-F HP7.515HC-F HP7.515HD-f24” HP7.524HB-F HP7.524HC-F HP7.24HD-F10 HP MODELS15” HP1015HC-F HP1015HD-F24” HP1024HC-F HP1024HD-F
Note: Information about the flow curves: 1. motor: 3450 RPM impeller: D2. motor: 3450 RPM impeller: C3. motor: 3450 RPM impeller: B4. motor: 3450 RPM impeller: A
| Model Number | HP7.515HB-F 7.5 |
|---|---|
| Series | HP Vertical Coolant Pumps |
| Max Flow (GPM.) | 310 |
| Max Flow GPH | 18600 |
| TDH Maximum (Ft) | 108 |
| TDH Maximum (PSI) | 46 |
| TDH BEP (FT.) | 96.000000 |
| Horse Power (HP) | 7 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 7.5000 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 2.5 |
| Wetted Materials | Acetal-Delrin, Carbon, Cast Iron, Steel |
| Voltage (V) | 230/460 |
| Voltage (Range) | 220-240/460-480 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 50/60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 182/4TC |
| Self Priming | Yes |
| Max Operating Temperature (F) | 180 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | Sleeved CS |
| Length (In.) | 15.000000 |
| Mechanical Seal | No |
| Motor Bearings | Ball |
| Impeller Size (IN.) | 5.500000 |
| Impeller Number (In.) | B |
| Coupling | Y |
| Other | suitable replacement for OEM pumps like Gusher Ruthman |
| Impeller Material | Plastic, semi-open double suction |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 205.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 80 Feet Of Head | 253 |
| GPM Of Water At 90 Feet Of Head | 200 |
| GPM Of Water At 100 Feet Of Head | 100 |
Supporting Docs
Supporting Docs
You May Be Interested In
