Positive Displacement Pumps
These pumps are often thought of as high-pressure pumps. Their
positive displacement of fluid and fixed volume are the result of
the fluid being mechanically moved through their pump passage on a
regular cycle. This means that regardless of the system they
discharge into, the pressure and volume will remain constant. The
power of the driving device and its speed, limit the volume and
pressure.Positive Displacement pumps:Flow rates of GPD, CC/min to
100 GPM typically.Discharge pressures of a 1 to 1000 PSI.Low speed
and fixed volume per cycle, they handle very viscid fluids
well.Smaller than centrifugal pumps.Quiet, do not ad much heat to
the fluid, suitable for shear sensitive fluids.Diaphragm pumps can
easily pass solids, stringy and fibrous foreign matter. Are made in
materials from CI to Titanium and PP, PVDF and PPS engineering
resins.
-
Jabsco Pumps
Flex. Imp. Face Seal
777-9001
$590.00Flexible impeller pump. Full cam. Neoprene for water and general purpose pumping. Nitrile impeller is ideal for oil based products. Reduce flow 50% for half cam operation. Use face seal to extend pump life. Do not pump gasoline or other flammable... -
Hypro Pumps
Ped. Mount CI pump #4
GPCV4V
$1,253.28CI pedestal or long coupled Rotary gear pump end. 303 SS fastners and shaft, CI gears.Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for mor...
-
Hypro Pumps
Ped. Mount CI pump #5
PCN5V
$1,901.42CI pedistal or long coupled pump end. 303 SS fastners and shaft, CI gears.Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for more than on...
-
Aquatec Pumps
115v Electric diaphragm pump
5850-7E12-J574
$281.78Electric diaphragm pump. These pumps are specifically designed for mobile low flow or low voltage applications such as Expreso coffee, water systems, ice makers, pesticides and fertilizers. Pressure switch set at 60 PSI. Connections are 3/8 " Joh...
