Rotary Pumps - Gear, Flexible Impeller, Screw
These pumps have a set of rotating gears, flexible impellers, screw
rotor or vanes connected to a driven shaft. Therefore most of these
pumps incorporate a mechanical seal, packing or lip seal along the
shaft at its back end in order to keep the fluid from leaking along
the shaft. There are a few models, which are magnetically coupled
and thus seal-less. Another type which is seal-less is the
Peristaltic which uses a rotating roller assembly to compress a
hose over a given arc length. These pumps are very reliable in
pumping medium to thick liquids which typically are not handled by
Centrifugal pumps and in applications where medium to high
discharge pressures are needed at low flow rates. Varying the motor
speed easily controls their output. Most units include some sort of
built in relief valve, but those that do not must have one
installed into the piping to prevent a dangerous over pressure
condition. Not recommended for liquids with fine abrasives or thin
non-lubricating liquids like water that will accelerate pump
wear.Typical Positive Displacement Rotary pumps include helical
gear, spur gear, lobe, progressive cavity, peristaltic, flexible
impeller and sliding vane to name a few.
-
PumpBiz
WOBBLE STATOR PUMP & 3 phase MOTOR
APM-44CSFM-3
$3,821.55Liberty Pumps are backed by over fifty years of progressive cavity pump product sales and technical service experience. American Pump Series Progressive Cavity Pumps are designed with a singular helical rotor that eccentrically turns within a dou... -
Flojet Pumps
12vdc Diaphragm Demand Pump
4300-500
$239.00Industrial QUAD pump - Developed to deliver higher flows up to 5 GPM using a four piston design with excellent self-priming capability. 04300-500A Built-in pressure switch automatically starts and stops pump at its 45 PSI setting.Santoprene diap...
12 Volt Learn More -
Flojet Pumps
115v Dia. Pump w/Switch
4300-529A
$589.00Commercial Duty - Developed to deliver higher flows up to 3.3 GPM using a four piston design with excellent self-priming capability. Built-in pressure switch automatically starts and stops pump at its 30 PSI setting. Motor is a Induction motor fo...Continuous Duty FKM Induction motor Learn More -
Flojet Pumps
115v Dia. Pump w/Switch
4300-531A
$579.00Commercial Duty - Developed to deliver higher flows up to 3 GPM using a four piston design with excellent self-priming capability. Built-in pressure switch automatically starts and stops pump at its 30 PSI setting. Motor is a continuous duty PSC,...Continuous Duty Santo Learn More -
Flojet Pumps
115v Diaphragm Pump w/Switch
4300-043A
$231.00Diaphragm Pump, electric, Industrial QUAD pump - Developed to deliver higher flows up to 5 GPM using a four piston design with excellent self-priming capability. Permanent Magnet Motor, brushes. Built-in pressure switch automatically starts and s...NOT Continuous duty Learn More -
Oberdorfer Pumps
N992R Gear Pump & Mtr
N992R-C82
$1,618.1024vDC gear pump and motor. Pump housings and gears are made of top quality bronze; shafts are from stainless steel 303. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life. Inclu...1/4HP 24vDC Learn More -
Flojet Pumps
12vdc Dia. Pump
04300-143
$208.00Industrial QUAD pump - Developed to deliver higher flows up to 4.8 GPM using a four piston design with excellent self-priming capability. Built-in pressure switch automatically starts at 30psi and stops pump at its 45 PSI setting.Santoprene diap...
-
Oberdorfer Pumps
3/4" Bronze gear pump 1HP
N970H-N47
$2,394.003/4" Bronze rotary gear pump without relief valve and close coupled to a 1 HP 115v/1/60 1725 RPM TEFC motor.Pump housings and gears are made of top quality bronze, shafts are stainless steel 303. Bearings are made of high performance carbon-gra...115/230v ODP 1HP Learn More -
Oberdorfer Pumps
Close Coupled Bronze Rotary Gear Pump w/ relief valve
N991RN32-F08
$881.00Bronze Rotary Gear Pump with electric motor. Pump housings and gears are made of top quality bronze, shafts are 303 stainless steel. Bearings are designed of high performance carbongraphite material selected for wear resistance and long service...Pump & 1/3HP Motor 115v 1/4" Learn More -
Oberdorfer Pumps
Bronze gear pump forward reverse
N992-37F30
$1,523.00Oil change pump. Pump housings and gears are made of top quality bronze; shafts are from stainless steel 303. Close coupled to a 115vac motor including a Forward / Off / Reverse switch. Often used at dockside for changing the oil in boats. Bearing...
1/3HP 115v TEFC REVERSIBLE Learn More