Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Munro Pumps
Dewatering Pump 2HP
MUFS315S22
$2,190.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double c...220v Learn More -
Barnes Pumps
3SE High Flow sewage pump 104911
3SEV1094L
$2,431.00High Flow sewage pump. Submersible non-clog sewage pump designed for typical raw sewage applications.1HP 230/3 Learn More -
Barnes Pumps
3SEV High Flow sewage pump
3SEV1044L
$2,431.00High Flow sewage pump. Submersible non-clog sewage pump designed for typical raw sewage applications.1HP 480/3 Learn More -
Barnes Pumps
3SE Septic tank pump
3SEV1024L
$2,222.00Septic tank pump. Submersible non-clog sewage pump designed for typical raw sewage applications. Vortex impeller. 1725 RPM -
Barnes Pumps
3SE sewage pump
3SEV724L
$2,092.00High Flow sewage pump. Submersible non-clog sewage pump designed for typical raw sewage applications. -
Munro Pumps
Dewatering Pump 2HP
MUFS315T44
$2,190.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double c...460v/3ph Learn More -
Myers Pumps
Submersible Sewage Pump
WHR10-21C
$2,545.00This pump is designed for use in light commercial and residential raw sewage applications. This pump will pass a full 2-inch sphere. The recessed vortex impeller provides an unobstructed passage in the volute case which allows these pumps to ...OBSOLETE Learn More -
Barnes Pumps
3SE Vortex, Single Seal
3SEV794L
$2,175.00Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
3SEV Sewage pump
3SEV514DS
$2,168.00Submersible non-clog sewage pump designed for typical raw sewage applications. -
Power-Flo Pumps
High Temperature Sewage pump
PFSE51HT
$2,051.31High Temperature 200F Sewage Submersible trash pump. 1/2 horsepower sewage ejector pump. Inboard mechanical seal and over sized motor provide for reliable continuous duty operation in demanding waste water applications. High Temperature Sump pu...Submersible High Temperature Pump 115v 1/2HP Learn More