Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Munro Pumps
Dewatering Pump 5HP
MUFS437T44
$3,574.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double cas... -
Barnes Pumps
Fountain pond Pump CI 1.5hp
3SF1524HD
$4,937.00Heavy Duty submersible fountain / water fall pond pump. All Cast Iron construction, Oil filled permanent split capacitor (PSC) motor for high torque. Motor upper and lower ball bearings, oil lubricated. Rated for continuous duty. SS fasteners, ai... -
Barnes Pumps
Sewage Pump
3SE1032DS
$5,052.29Submersible non-clog sewage pump designed for typical raw sewage applications. 1.5" spherical solids handling -
Barnes Pumps
Sewage Pump
3SE2032DS
$5,035.90Submersible non-clog sewage pump designed for typical raw sewage applications.1.5" spherical solids handling -
Barnes Pumps
Fountain pond Pump CI 3hp
3SF3024L
$5,247.00Heavy Duty submersible fountain / waterfall pond pump. All Cast Iron construction, Oil filled permanent split capacitor (PSC) motor for high torque. Motor upper and lower ball bearings, oil lubricated.SS fasteners, air dry enamel paint on ext...
109977 Learn More -
EBARA Pumps
3 HP Non clog sewage pump
100DLU62.2S2
$5,408.70Applications- Watering
- Dewatering
- Drainage
- Construction
3HP 208-230V HS Learn More -
Power-Flo Pumps
8" Submersible Non-clog Pump
PF8NC36046
$22,000.00Industrial Sewage non-clog submersible pump. Vertical ANSI 125# Flanged discharge. 3” Spherical Solids handling, Double Seal for long life. Double mechanical, Oil Filled pressureequalized reservoir, inner seal - Carbon/Ceramic, outer seal - Silic... -
Power-Flo Pumps
4" Submersible Non-clog Pump
PF4NC7524
$10,879.844" Industrial Sewage non-clog submersible pump. Vertical ANSI 125# Flanged discharge. 3” Spherical Solids handling, Double Seal for long life. Double mechanical, Oil Filled pressure equalized reservoir, inner seal - Carbon/Ceramic, outer seal - Si...
7.5HP 230v/1 Learn More -
Power-Flo Pumps
8" Submersible Non-clog Pump
PF8NC48046
$22,000.00Industrial Sewage non-clog submersible pump. Vertical ANSI 125# Flanged discharge. 3” Spherical Solids handling, Double Seal for long life. Double mechanical, Oil Filled pressureequalized reservoir, inner seal - Carbon/Ceramic, outer seal - Silic... -
EBARA Pumps
PRO Cast Sewage Pump 2.5" Solids
80DLU63.7S2
$4,013.33- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
- Built-in motor protection with autocut, protects motor a...
5HP 208-230V HS Learn More