Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
BSW314HE 1/2
$1,299.60The BSW & CSW series pumps are identical in performance, differing only in flange & discharge size. Flange mount pumps are designed to mount to the outer wall of integral machine sumps or tanks. All flange mount pumps have two horizontal discharg... -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TN46E 1/2
$1,184.90Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
CSW313HF 1/2
$1,681.52Flange Mount pumps are designed to mount to the outer wall of integral machine sumps or tanks. All Flange Mount pumps have two horizontal discharge ports as standard to facilitate plumbing from either side, with a single internal port available a...
-
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNW424E 1/2
$1,880.71Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV512L
$1,782.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 12.6 -
Barnes Pumps
Sewage pump, Sgl seal
3SE514L
$1,674.55Submersible non-clog sewage pump designed for typical raw sewage applications. Complete solid cast Iron construction.1/2HP 115v Learn More -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV522L
$1,861.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 6.0 -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNW436E 1/2
$2,366.68Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV592L
$2,187.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 5.8/5.3 -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRSS31E 1/2
$2,335.91Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten...