Submersible Sewage Pump
-
Model Number:
WHR5-43
-
Product Name:Submersible Sewage Pump
-
Manufacturer:
-
Series (17 Models):
Model Number
WHR5-43
$2,500.00
Myers WHR5-43
This pump is designed for use in light commercial and residential
raw sewage applications. This pump will pass a full 2-inch sphere.
The recessed vortex impeller provides an unobstructed passage in
the volute case which allows these pumps to handle stringy, trashy
solids without plugging the impeller. The vortex impeller also
greatly extends the pumps' bearing life.
- Domestic wastewater and septic systems.
- Light commercial sewage.
- High capacity fluid transfer.
- UL, CSA, SSPMA and ETL listed. Note: Double seal models with seal leak detector are not UL listed.
- Oil-filled for cooler operation, constant bearing lubrication.
- Single phase PSC motors eliminate starting switches.
- Recessed impeller increases bearing life.
- Thermal overload protection with automatic reset.
- Liquids Handling: drain water and domestic sewage
- Min. Sump Dia.: Simplex 24 in.
- Min. Sump Dia.: Duplex 30 in.
| Model Number | WHR5-43 |
|---|---|
| Series | WHR 2 |
| Max Flow (GPM.) | 130 |
| Max Flow GPH | 7800 |
| TDH Maximum (Ft) | 24 |
| TDH Maximum (PSI) | 10 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.5000 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 2 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 460 |
| Voltage (Range) | 460-480 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Self Priming | Yes |
| Max Operating Temperature (F) | 140 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 75.000000 |
Supporting Docs
Supporting Docs
