Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
3SEV submersible sewage pump
3SEV1024DS
$2,431.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 8.5 -
Barnes Pumps
Effluent 1 HP
EH1022L
$2,110.00Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch. -
Tsurumi
Tsurumi Submersible Pump HS3.75S-61 230v
HS3.75S
$699.00Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Florida to d...1HP 230v/1 Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRSS36HE 1
$2,701.71Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten... -
Barmesa Pumps
1 HP Submersible Dewatering Pump
2AHS101
$611.00Electric Manual Submersible Dewatering Pump 1HP. Heavy duty electric contractors pump to remove water from construction sites, ditches, yard, basement. Handles algae and other debris up to 3/8″ x 1″ in size.
- BEARINGS - Ball, single row, per...
5700GPH 1HP 115v Learn More -
Barmesa Pumps
1HP Submersible Dewatering Pump Automatic
2AHS101A
$642.00Automatic Submersible Dewatering Pump. Heavy duty solids handling electric water pump for construction sites, ditches, loading docks, yard and basement.- BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed...
5700GPH 1HP 115v Learn More -
Barnes Pumps
Non-Clog Submersible w/o float
SE1074L
$2,017.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. All cast iron, including impeller. 104888104888 Learn More -
Barnes Pumps
Sewage Pump
3SE1074DS
$3,130.00Barnes Pump. Barnes Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 8.8/8.3 -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TN36HE 1
$1,372.67Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Barnes Pumps
Sewage Pump
3SE1022DS
$4,806.45Submersible non-clog sewage pump designed for typical raw sewage applications.1.5" spherical solids handling