My Cart

1 HP Submersible Dewatering Pump

5700GPH 1HP 115v
Model Number
PumpBiz 2AHS101 1 HP Submersible Dewatering Pump

Barmesa 2AHS101

Electric Manual Submersible Dewatering Pump 1HP. Heavy duty electric contractors pump to remove water from construction sites, ditches, yard, basement. Handles algae and other debris up to 3/8″ x 1″ in size.

  • BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed for radial and axial loads.
  • CORD ENTRY - 15 ft of neoprene cord, sealed against moisture.
  • SEAL Design: double, mechanical, oil filled chamber.
  • SEAL Material: Double- upper part of carbon-ceramic, lower part of silicone carbide. Stainless steel hardware. Oil Filled
  • MOTOR - Dry type submersible motor, single phase, 115/230 volts, 60 Hz, 3450 RPM, For continuous duty, with thermal protector in winding.
  • STRAINER - Polyvinyl chloride (PVC).
  • HANDLE - Nylon 6.
  • PUMP OPERATION - Manual, does not include level control
  • PAINT -Air dry enamel, water based.
  • O-RINGS - Nitrile rubber (NBR).
  • HARDWARE - 304 series stainless steel.
  • SHAFT -410 series stainless steel.
  • IMPELLER Design: 8 vane, open, semi-vortex.
  • IMPELLER Material: Hytrelï½® thermoplastic elastomer.
  • OIL CHAMBER - Cast iron FC-200.
  • MOTOR HOUSING Aluminum alloy ADC12
  • PUMP BODY Cast iron FC-200
  • DISCHARGE - 2" NPT vertical, adapter included.
  • SOLIDS HANDLING - 1/2 inch.
More Information
Model Number 2AHS101
part number 62180103
Series Barmesa Industrial Pumps
Max Flow (GPM.) 95
Max Flow GPH 5700
TDH Maximum (Ft) 60
TDH Maximum (PSI) 26
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1.0000
Outlet Connection Type MNPT
Outlet (In.) 2
Wetted Materials Aluminum, Cast Iron, Epoxy coated
Elastomers / O-ring Urethane
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 12
Motor Hermetically Sealed
Speed (RPM.) 3450
Max Operating Temperature (F) 104
Max Particle Size (In) 0.5
Viscosity Milk 3.20 cp 40.00 ssu
Length (In.) 13.000000
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other Max. Diameter (inch) : 10 1/16, Max. Height (inch): 12 15/16. Continuous Running Water Level (inch): 3 1/2 Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 1300 Watts.
Approvals CSA
Impeller Material Urethane, semi-vortex
Cord Size 16/3
Cord Length (Ft.) 15
Duty Continuous
Weight (Lbs) 33.000000
Warranty (YRS.) 1
GPM Of Water At 15 Feet Of Head 40
GPM Of Water At 20 Feet Of Head 35
GPM Of Water At 25 Feet Of Head 28
GPM Of Water At 30 Feet Of Head 20

Supporting Docs

Supporting Docs
(Size: 624.62 KB) Extension: pdf
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".