Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Submersible 1.5HP 3" Sewage Pump
3BSE154SS
$3,422.00Submersible Sewage NON-CLOG pump, 2-1/2" spherical solids handling 460v.
Heavy duty waste water pumps for all commercial applications
Features:
- 25 ft. cord.
- All cast iron.
- Silicon Carbide SiC inboard shaft seal in oil filled chamber
- Impel...
460v/3 1.5HP Learn More -
Barmesa Pumps
Submersible 1.5HP 3" Sewage Pump
3BSE153SS
$3,422.003" Submersible Sewage NON-CLOG pump, 2-1/2" spherical solids handling.
Heavy duty waste water pumps for all commercial applications
Features:
- 25 ft. cord.
- All cast iron.
- Silicon Carbide SiC inboard shaft seal in oil filled chamber
- Impelle...
200/230/3 1.5HP Learn More -
Barnes Pumps
Fountain pond Pump CI 1.5hp
3SF1524HD
$4,937.00Heavy Duty submersible fountain / water fall pond pump. All Cast Iron construction, Oil filled permanent split capacitor (PSC) motor for high torque. Motor upper and lower ball bearings, oil lubricated. Rated for continuous duty. SS fasteners, ai... -
Myers Pumps
Light comm. sewage
MW150-21
$3,088.00This pump provides big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial seage applications, and passes a full 2" diameter solid. This pump is constructed of ...1.5HP/230V Learn More -
Barnes Pumps
Effluent Pump man 480v
EH1542DS
$3,149.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f...105082 Learn More -
Barnes Pumps
Effluent Pump man 600v
EH1552DS
$3,149.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f... -
Power-Flo Pumps
Non-Clog Submersible
PFSE1524
$4,258.77Submersible NON-CLOG pump, 2-1/2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled Silicon Carbide. 25 Ft. Cord. Pressure grommet for sealingand strain relief. Does not include float switch. All cast... -
Barmesa Pumps
Submersible 1.5HP 3" Sewage Pump
3BSE152SS
$3,604.00Submersible Sewage NON-CLOG pump, 2-1/2" spherical solids handling.
Heavy duty waste water pumps for all commercial applications
Features:
- 25 ft. cord.
- All cast iron.
- Silicon Carbide SiC inboard shaft seal in oil filled chamber
- Impeller D...
200/230v/1 1.5HP Learn More -
Webtrol
Stainless Steel Dewatering Pump
EPD-15MT
$3,865.68The Webtrol Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump....1 1/2HP 208-230V Learn More -
Barnes Pumps
Effluent Pump man 200/240v
EH1592DS
$3,149.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f...