Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Submersible Sewage Pump
4SE11334L
$9,968.0011hp Submersible Sewage Pump. Barnes 4" Horizontal Discharge Solids Handling Pump 4" horizontal discharge handles up to 3" spherical solids. Motor sizes from .9 to 100HP Open and enclosed impellers, some with pump-out vanes on backside. Delta i...4" Sewage Pump 230v 11HP Learn More -
Tsurumi
PSF Pond Pump
50PSF2.75S-61 115V
$908.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
115v/1 Learn More -
Munro Pumps
Dewatering Pump 5HP
MUFS437T44
$3,574.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double cas... -
Tsurumi
PSF Pond Pump
50PSF2.75S-60 230
$908.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
230v/1 1HP Learn More -
Power-Flo Pumps
8" Submersible Non-clog Pump
PF8NC36046
$22,000.00Industrial Sewage non-clog submersible pump. Vertical ANSI 125# Flanged discharge. 3” Spherical Solids handling, Double Seal for long life. Double mechanical, Oil Filled pressureequalized reservoir, inner seal - Carbon/Ceramic, outer seal - Silic... -
Power-Flo Pumps
8" Submersible Non-clog Pump
PF8NC48046
$22,000.00Industrial Sewage non-clog submersible pump. Vertical ANSI 125# Flanged discharge. 3” Spherical Solids handling, Double Seal for long life. Double mechanical, Oil Filled pressureequalized reservoir, inner seal - Carbon/Ceramic, outer seal - Silic... -
Munro Pumps
Dewatering Pump 3HP
MUFS222T44
$2,456.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double cas... -
Munro Pumps
Dewatering Pump 7.5HP
MUFS455T44
$4,462.00Suitable for countless applications including construction, water features, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge desi...
-
Munro Pumps
Dewatering Pump 2HP
MUFS315T44
$2,190.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double c...460v/3ph Learn More -
Munro Pumps
Dewatering Pump 5HP
MUFS337T44
$3,574.00Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double cas...