Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
High pressure septic pump
BPSTEP1022
$1,894.00STEP Submersible High Head Effluent, septic tank pump. S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent solids applications for the long term. Rug...1HP 230v 2" High Head, Manual Learn More -
Tsurumi
LB Heavy Duty Dewatering Pump
LB-800
$743.00Heavy Duty Submersible Dewatering Pump. Tsurumi Submersible pump with top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. Semi-open urethane impeller with ...
1HP 230v/1 Learn More -
Barnes Pumps
Effluent 1 HP
EH1022L
$2,110.00Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch. -
Tsurumi
Tsurumi Submersible Pump HS3.75S-61 230v
HS3.75S
$699.00Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Florida to d...1HP 230v/1 Learn More -
Barnes Pumps
Vortex Pump w/ dbl seal 1hp
3SEV1022DS
$2,947.00Barnes Submersible NON-CLOG vortex Pump, handles 2" spherical solids, Vortex recessed impeller, double seal. Designed for raw sewage, dewatering and wet mud applications. All cast iron construction. 15 ft. cord and plug.Pump may be operated D...
-
Barnes Pumps
Effluent Pump man 240v
EH1022DS
$2,508.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f... -
Barnes Pumps
Effluent Pump Step
STEP1022SS
$2,232.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller hand... -
Barnes Pumps
septic tank pump Step
STEP1022DS
$2,623.00septic tank pump. S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vo...