Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Power-Flo Pumps
High Temperature Sewage pump
PFSE51HT
$2,051.31High Temperature 200F Sewage Submersible trash pump. 1/2 horsepower sewage ejector pump. Inboard mechanical seal and over sized motor provide for reliable continuous duty operation in demanding waste water applications. High Temperature Sump pu...Submersible High Temperature Pump 115v 1/2HP Learn More -
Myers Pumps
Submersible Sewage Pump Manual
SRM4M1C
$899.004/10HP sewage pumps for residential septic tank sewage. Free flow of liquids, solids up to 2" diameter. SRM4P-1, SRM4P1C & SRM4P2C have piggy-backed mechanical float level controls for fully automatic operation. SRM4M1C & SRM4M2C can be directl...115V Learn More -
Myers Pumps
Light comm. sewage
MW50-11
$1,134.00This pump provides big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial seage applications, and passes a full 2" diameter solid. This pump is constructed of on... -
EBARA Pumps
Stainless Steel Dewatering Pump
EPD-3AS1
$809.00Stainless Steel Dewatering Pump, sump
Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large be...
1/3HP 115V HS Learn More -
Power-Flo Pumps
1/2 HP Sewage pump - 115v, 1ph
PFSE51A
$1,493.25Sewage Submersible NON-CLOG vortex pump. 1/2 horsepower sewage ejector pump. Inboard mechanical seal and over sized motor provide for reliable continuous duty operation in demanding waste water applications. Cast iron vane type impeller. INCLUDES... -
Munro Pumps
Puddle Pro Pump 1/2HP
FSR4001S11
$776.25FSR Dewatering Pump is especially designed for continuous duty with stable operating performance to carry dirty or clean water. Motor has ball bearings top & bottom. The FSR400 requires no priming, suction hose or foot valve. Simply submerge the ...115v Learn More -
Barnes Pumps
High temperature pump
SE411HT
$1,502.00High Temperature Submersible non-clog pump. 2" Spherical Solids Handling. High temperature water pump for condesate, boiler blow down high temp pits. Manual operation. Rated to 200F
200F 115v Learn More -
Tsurumi
PMU Tsurumi fountain pump
50PU2.15S
$477.40Tsurumi Submersible Pond Fountain Pumps. 3000GPH (50gpm) rated but realistic flow is 2400GPH (40gpm) max. See flow curve.- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours....
115v 1/5HP Learn More -
Barnes Pumps
Sewage Pump
3SE514DS
$2,423.55Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 11.6 -
Tsurumi
Tsurumi Submersible Pump
HS2.4S-62
$335.00Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used to dewater floodi...
3 180GPH 1/2HP 115v Learn More