PMU Tsurumi fountain pump
Series (19 Models):
Product Name:PMU Tsurumi fountain pump
Tsurumi Submersible Pond Fountain Pumps. 3000GPH (50gpm) rated but realistic flow is 2400GPH (40gpm) max. See flow curve.
- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wound highly efficient motor.
- Corrosion Resistant Stainless Steel Motor Casing
- Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.
- Environment friendly white oil seal lubricant
- Solids handling semi-vortex impeller
- For pond or fountain pump sizing contact PumpBiz
- 20FT cord
Hear what customers are saying about Tsurumi fountain pumps "After eight years of almost continuous operation the motor finally quit. While this is sad it has certainly done its duty. "
- 2 Year warranty
A Better pump than China shinmaywa norus.
|Series||Waterfall Pond Fountain Pumps Tsurumi|
|Max Flow (GPM.)||40|
|Max Flow GPH||2400|
|TDH Maximum (Ft)||15|
|TDH Maximum (PSI)||6|
|TDH BEP (FT.)||11.500000|
|Horsepower (IE .5, 1, 1.5, 20)||0.2000|
|Outlet Connection Type||FNPT|
|Wetted Materials||304SS, FRP|
|Elastomers / O-ring||Buna-Nitrile|
|Phase (Ø)||Single (1)|
|Motor Amps (A)||3.2|
|Max Operating Temperature (F)||140|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||SiC|
|Mechanical Seal Type||Double|
|Other||Total operating cost per / MO. @ BEP $13.28 (based on $.10 per kW HR and 24 hours per day, 7 days per week operation|
|Impeller Material||Plastic, non-clog|
|Cord Length (Ft.)||20|
|Country of Manufacture||Japan|
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.