Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Tsurumi
LB Heavy Duty Dewatering Pump
LB-800
$743.00Heavy Duty Submersible Dewatering Pump. Tsurumi Submersible pump with top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. Semi-open urethane impeller with ...
1HP 230v/1 Learn More -
Power-Flo Pumps
Sewage pump
PFS421
$1,073.39Submersible non-clog sewage pumps are designed for typical raw sewage application.PFS sump pumps feature:
- Maximum flow rate to 92 gpm
- A shut-off head of 26 feet
- Permanent split capacitor oil filled motor for reliable, high performance, lo...
230v/1 Learn More -
Barnes Pumps
Sewage Pump
3SE524DS
$2,521.99Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 5.9 -
EBARA Pumps
SS sewage 1.5hp
50DWAU61.1S2
$1,685.77Ebara SS sewage submersible pump. Automatic w/ float switch. Impeller type: Single channel impeller, non-clog.1 1/2HP 230V HS Learn More -
Barnes Pumps
Sewage Pump
3SE594DS
$2,785.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 3.2/3.0 -
Barnes Pumps
Sewage Pump
3SE3024DS
$5,952.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 28.0; 3" spherical solids handling3hp/230/1ph/1750/DS Learn More -
Barnes Pumps
Sewage Pump
3SE3034DS
$5,952.00Submersible non-clog sewage pump 3", double seal.
Commercial use, Designed for typical heavy duty raw sewage, waste water applications.
- Shaft seal: Double Mechanical, Oil filled pressure equalized reservoir
- 2-1/2" spherical solids handling ...
3ph/230v 3HP DS Learn More -
Barnes Pumps
Sewage Pump
3SE1032DS
$5,052.29Submersible non-clog sewage pump designed for typical raw sewage applications. 1.5" spherical solids handling -
Barnes Pumps
Sewage Pump
3SE2032DS
$5,035.90Submersible non-clog sewage pump designed for typical raw sewage applications.1.5" spherical solids handling -
Power-Flo Pumps
3/4HP Sewage pump -
PFSE794
$1,988.88Sewage Submersible NON-CLOG vortex pump. 3/4 horsepower sewage ejector pump. Inboard mechanical seal and over sized motor provide for reliable continuous duty operation in demanding waste water decorative water features, aquascape's applications....NO float switch Learn More