Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Power-Flo Pumps
High Temperature Sump pump
PFS411HT
$1,499.23High Temperature Sump / sewage pump 200F . Submersible non-clog sewage pumps are designed for high liquid temperature to 200 degrees, heavy duty applications with some solids.
High temp sump pumps feature:
- Maximum flow rate to 92 gpm
- A shut-o...
High Temperature Sewage pump Learn More -
Barnes Pumps
High temp submersible pump
SE411HTA
$1,587.00High Temperature automatic sump pump. Model SE411HTA is: High Temperature pump, Wide Angle, N/O, Tethered Mechanical float switch, 15ft Cable with piggy-back Plug High Temperature Submersible non-clog pump. 2" Spherical Solids Handling. Manual & A...
200F 115v Automatic Learn More -
Myers Pumps
Manual Effluent Water Pump
ME40AG-11
$535.00ME40 Series 4/10 HP Effluent and Drain Water Pumps.
- Two vane thermoplastic impeller design provides maximum dosing efficiency.
- Enclosed design for high efficiency pumping.
- Eliminates possibility of jamming between impeller and volute.
- Orig...
4/10HP 115v Learn More -
Myers Pumps
Submersible Sewage Pump Manual
SRM4M1C
$899.004/10HP sewage pumps for residential septic tank sewage. Free flow of liquids, solids up to 2" diameter. SRM4P-1, SRM4P1C & SRM4P2C have piggy-backed mechanical float level controls for fully automatic operation. SRM4M1C & SRM4M2C can be directl...115V Learn More -
Barnes Pumps
Submersible Pump
SE411A
$1,047.00Submersible HD effluent sump pump. Model SE411A has a Wide Angle PVC float switch, 15ft, Cable w/Piggy back Plug, N/O 2" spherical solids handling. These submersible Sewage pumps handle the tough demanding tasks of waste transfer with high eff...