Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE51SS
20% Off Special Price $1,403.57 Regular Price $1,754.46Submersible NON-CLOG pump 120v, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Single phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double v...
115v 1/2HP Learn More -
Barnes Pumps
Sump Pump-096752
SE511
$1,427.38Submersible NON-CLOG pump, 2" spherical solids handling. In-board oil filled mechanical seal with exclusionary shaft seal as secondary. Does not include float switch. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Heaviest duty pump o...096752 1/2HP, 115v 1750rpm Learn More -
Tsurumi
Tsurumi Sand Trash Pump Automatic
HSZ2.4S
15% Off Special Price $379.10 Regular Price $446.00HSZ Tsurumi Submersible Sand Trash Pump with float switch for automatic operation.
Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly b...
1/2HP 115v 53GPM Learn More -
EBARA Pumps
SS sewage .5hp
50DWU6.4S
$1,360.52SS sewage pump vortex/non-clog impeller. No float switch. Single Channel Impeller1/2HP 115V HS Learn More -
EBARA Pumps
SS sewage pump
50DWXU6.4S
$1,538.00SS sewage pump vortex non-clog impeller. No float switch. Submersible sewage Pump1/2HP 115V HS Learn More -
Barnes Pumps
Sewage pump w/ vertical float
SEV412VFT
$883.00Barnes Submersible NON-CLOG vortex sewage pump,
2" solids trash handling.
Includes attached vertical float with piggy-back style plug , PVC, snap action. 20 ft. cord. All cast iron, including impeller. Some sort of course screen should be used o...
Vortex impeller submersible trash pump Learn More -
Myers Pumps
Light comm. sewage
MW50-11
$1,134.00This pump provides big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial seage applications, and passes a full 2" diameter solid. This pump is constructed of on... -
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ float
SE51A
$1,506.56Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. REPLACES SE51AU- Handles 2" spherical solids
- Includes 15' Cord w/ plug
- Includes piggy back mechanical float switch...
115v 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE511VF
$1,616.77Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump. -
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE511A
$1,113.00Submersible NON-CLOG pump, Sewage up to 2" spherical solids handling. 20 ft. cord. All cast iron. Impeller Design: open, double vane.Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Some sort of course screen should be us...1/2Hp 115v 2" Learn More