Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
EBARA Pumps
Stainless Vertical Booster pump
EVMSU1-8F0100D3S
$1,977.14EVMSU1-8F0100D3S Stainless Steel Vertical Booster pump. With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA Model EVMSU is designed for booster, water purification, and hot water applications.State-of-the-art formed stainle...
1HP 230/460 220/380V ODP Learn More -
Barmesa Pumps
Effluent Pump High Head 230v
2BEH103SS
$2,398.00Submersible High Head effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. 2 Vane CI bronze impeller handles 3/4" spherical solids. Due to its motor 3450RPM, this pump is ...
Submersible effluent pump, 230v 1HP for solids up to 3/4", High head Learn More -
Barmesa Pumps
Effluent Pump 1hp 480v
2BEH104SS
$2,398.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. High head submersible. Rugged Cast Iron construction. 2 Vane CI bronze impeller handles 3/4" spherical solids. Due to its motor 3450RPM,...
Submersible effluent pump, 460v 1HP for solids up to 3/4", High head Learn More -
Tsurumi
PSF Pond Pump
50PSF2.75S-61 115V
$908.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
115v/1 Learn More -
Webtrol
18GPM Vertical Booster Pump
NV12B4FV3T
$4,333.50The Webtrol V Series is a vertical multistage pump offering technically advanced designs to meet market demands including hot water applications. Every Webtrol V Series pump is hand assembled and checked during each step of the assembly process...1HP 208-230/460V TEFC Learn More -
Tsurumi
PSF Pond Pump
50PSF2.75S-60 230
$908.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
230v/1 1HP Learn More -
Barnes Pumps
Submersible Effluent Pump
EHH1042L
$1,667.34EHH Series heavy duty effluent submersible pump high head or discharge pressure. New Old Stock. MANUAL OPERATION, no float switch, order seperately. -
Power-Flo Pumps
Non-Clog Submersible w/o float
PFSE1094
$2,239.27Submersible NON-CLOG pump, 2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled carbon. 15 Ft. Cord. Pressure grommet for sealingand strain relief. All cast iron, including impeller, 2 vane open type,... -
Barnes Pumps
Effluent Pump man 480v
EH1042DS
$2,718.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f...105074 Learn More -
Barnes Pumps
Effluent Pump man 600v
EH1052DS
$2,718.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f...