Effluent Pump 1hp 480v
-
Model Number:
2BEH104SS
-
Product Name:Effluent Pump 1hp 480v
-
Manufacturer:
Submersible effluent pump, 460v 1HP for solids up to 3/4", High head
Model Number
2BEH104SS
$2,398.00
Barmesa 2BEH104SS
Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. High head submersible. Rugged Cast Iron construction. 2 Vane CI bronze impeller handles 3/4" spherical solids. Due to its motor 3450RPM, this pump is much higher head than typical slow speed versions. All hardware is SS. Motor housing is oil-filled and has ball bearings. MANUAL OPERATION, no float switch.
Applications would include septic grey water, loading dock and parking lot sumps.
| Model Number | 2BEH104SS |
|---|---|
| part number | 62170654 |
| Max Flow (GPM.) | 80 |
| Max Flow GPH | 4800 |
| TDH Maximum (Ft) | 80 |
| TDH Maximum (PSI) | 34 |
| TDH BEP (FT.) | 50 |
| Horse Power (HP) | 1 |
| Horsepower (IE .5, 1, 1.5, 20) | 1 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 2 |
| Wetted Materials | CI-SS |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 460 |
| Voltage (Range) | 460-480 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 60 |
| Motor Amps (A) | 2.8 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Max Operating Temperature (F) | 104 |
| Max Particle Size (In) | 0.7500 |
| Viscosity | Cream 16.50 cp 100.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | Inboard, oil filled chamber |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Single |
| Impeller Size (IN.) | 4.62 |
| Other | 200-240/480 is Tri-Voltage. 600 v requires overload protection to be included in control panel. FLA 2.2 Includes 15ft cord 14/4 Not for use where human contact with pumped media is a common occurrence. |
| Impeller Material | Bronze, Open |
| Cord Length (Ft.) | 15 |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 84.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 20 Feet Of Head | 75 |
| GPM Of Water At 30 Feet Of Head | 68 |
| GPM Of Water At 40 Feet Of Head | 56 |
| GPM Of Water At 50 Feet Of Head | 45 |
| GPM Of Water At 60 Feet Of Head | 30 |
>
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.
During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.
Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.
Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".
During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.
Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.
Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".
