My Cart

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.
View as List Grid

Items 11-20 of 65

Set Descending Direction
per page
  1. EBARA Pumps

    SS sewage 1.5hp

    50DWAU61.1S2

    $1,685.77
    Ebara SS sewage submersible pump. Automatic w/ float switch. Impeller type: Single channel impeller, non-clog.
    1 1/2HP 230V HS Learn More
  2. Tsurumi

    1 hp Saltwater pump

    50TM2.75S 230

    $1,543.00
    Saltwater pumps submersible Semi vortex.

    The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. there is both Manual and Automatic versions available in ...

    230v/1 Learn More
  3. Tsurumi

    1 hp Saltwater pump

    50TMA2.75S

    $1,910.00
    Saltwater pumps submersible Semi vortex.

    The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. Automatic version. Float is internally wired.

    APPLICATIO...
    230 1phase Automatic Learn More
  4. EBARA Pumps

    SS sewage 1hp

    50DWXU6.75S2

    $1,742.00

    1HP SS sewage pump vortex / non-clog impeller. No float switch. Ebara stainless steel submersible dominator series of sewage pumps are made entirely of 304 stainless steel and have 25' power cords. 230v/1 

    EBARA Dominator is superior in dependabi...

    1HP 230V HS Learn More
  5. Barnes Pumps

    Effluent 1 HP

    EH1022L

    $2,110.00
    Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch.
  6. Barnes Pumps

    Submersible Pump 3hp

    3SE3034L

    $4,710.00

    Barnes Submersible Non-Clog sewage pump 3", cast iron construction.

    2 vane, open impeller with back pump out vanes. Dynamically balanced. Oil filled squirrel cage induction motor. Oil lubricated upper and lower motor ball bearings for continuous ...

    3hp 230v/3ph/1750 Learn More
  7. Power-Flo Pumps

    3 HP Submersible Sewage Pump

    PFSE3024

    $4,961.68
    Submersible NON-CLOG pump, 2-1/2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled Silicon Carbide. 25 Ft. Cord. Pressure grommet for sealingand strain relief. Does not include float switch. All cast...
    230/1 Learn More
  8. Myers Pumps

    Light comm. sewage

    MW150-21

    $3,088.00
    This pump provides big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial seage applications, and passes a full 2" diameter solid. This pump is constructed of ...
    1.5HP/230V Learn More
  9. Barnes Pumps

    Effluent Pump Step-DS 240v

    STEP522DS

    $2,307.00
    S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle...
  10. EBARA Pumps

    PRO Cast Sewage Pump 6"

    150DMLEU6112

    $5,034.08
    • Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
    • Built-in motor protection with autocut, protects motor a...
    15HP 230V HS Learn More
View as List Grid

Items 11-20 of 65

Set Descending Direction
per page