Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Tsurumi
Tsurumi Submersible Sand Trash Pump HS3.75S-61
HS3.75S
$699.00Tsurumi Submersible Sand Trash Pump HS3.75S-62.
Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Flo...
1HP 115v Learn More -
Barnes Pumps
Effluent 1 HP
EH1022L
$2,110.00Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch. -
Barnes Pumps
Effluent Pump man 480v
EH1042DS
$2,718.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f...105074 Learn More -
Barnes Pumps
Effluent Pump man 600v
EH1052DS
$2,718.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f... -
Barnes Pumps
Effluent Pump Step -DS
STEP1042DS
$2,827.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller hand... -
Barnes Pumps
Effluent Pump Step-DS 200/240v
STEP1092DS
$2,827.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller hand... -
Barnes Pumps
Effluent Pump Step-DS 600v
STEP1052DS
$2,827.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller hand... -
Tsurumi
Tsurumi Submersible Pump HS3.75S-61 230v
HS3.75S
$699.00Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Florida to d...1HP 230v/1 Learn More -
Barnes Pumps
Non-Clog Submersible w/o float
SE1074L
$2,017.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. All cast iron, including impeller. 104888104888 Learn More -
EBARA Pumps
Stainless Steel Dewatering Pump
EPD-10MT4
$1,842.00The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. T...1HP 460V HS Learn More