Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
AMT Pumps
Cast iron Suction Coolant Pump
5350-95
$659.81This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three Pha...
1/4 HP 115/230V Learn More
AMT Pumps
Cast iron Suction Coolant Pump
5351-95
$659.81This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three Pha...
1/4 HP 230/460V Learn More
AMT Pumps
Cast iron Suction Coolant Pump
535B-95
$320.44This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three P...
OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
AMT Pumps
Cast iron Suction Coolant Pump
5360-95
$962.63This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three Pha...
1/2 HP 230/460V Learn More
AMT Pumps
Cast iron Suction Coolant Pump
536A-95
$615.86This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three P...
OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
AMT Pumps
Cast iron Suction Coolant Pump
5370-95
$1,081.63This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three Pha...
3/4 HP 230/460V Learn More
AMT Pumps
Cast iron Suction Coolant Pump
537A-95
$744.78This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three P...
OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
AMT Pumps
Cast iron Suction Coolant Pump
5371-95
$990.12This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three Phase Motors ...
1 HP 230/460V Learn More
AMT Pumps
Cast iron Suction Coolant Pump
537B-95
$876.21This pump is designed for the circulation and spraying of coolants and cutting oils.
- Fully Interchangeable with Units Furnished on Most Imported Machine Tools
- 1/8 to 1 HP Totally Enclosed Motors
- 2 Pole, 3450 RPM
- Single or Three P...
OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
