Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
AMT Pumps
MSV3 2 HP 12 stage pump
MSV3-12-1P
23% Off Special Price $1,235.08 Regular Price $1,604.002HP Multistage Vertical booster pump, 12 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations includ...
2HP 230v Learn More -
Barmesa Pumps
High pressure septic pump Automatic
BPSTEP512A
20% Off Special Price $1,397.60 Regular Price $1,747.00Automatic STEP Submersible High Head Effluent, septic tank pump.
S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent solids applications for the long t...
1/2HP 115v 2" High Head, Automatic Learn More -
Barmesa Pumps
Grinder Pump Capacitor Kit
BGP302DS-2
$3,447.00Capacitor Kit to Model BGP302DS, PN 62350004
For 3hp Grinder Pump by Barmesa. Rugged and reliable grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects sewage. Capacitor and start relay...
3HP 230v/1 kit Learn More -
Graymills Pumps
Vertical Machine Tool Coolant Pump CI
FM73HA 1/4
$726.60Graymills machine tool pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a verti...1/4 HP 115V Learn More -
Tsurumi
AB - Series
100AB2.4S-61
$1,226.50Tsurumi Submersible Pond Fountain Pumps. Axial Flow Wastewater Pumps are often used for dewatering at high flow and low head. ( Manual Operation)- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings r...
Fountain Pump 1/2HP 115v Learn More -
Tsurumi
LB Tsurumi Pump 3"
LB-1500
$2,236.00Tsurumi Submersible SlimLine pump only 7-3/8"D with top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. Tsurumi Dewatering pumps have semi-open urethane...2HP 115v 7-3/8"OD Learn More -
Graymills Pumps
Vertical CI Coolant pump
FM712HB 1/4
$917.61Graymills coolant pump is typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. Coolant pump can also be used on other industrial applications requiring a vertical ca...1/4HP 230V Learn More -
Tsurumi
PSF Continuous Duty pond pump
50PSF2.4S
$623.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
1/2 hp 115V 1740GPH Learn More -
Graymills Pumps
Vertical CI Coolant Pump
FM76HA 1/4
$744.60Graymills coolant pump is typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cas...1/4HP 115V Learn More -
Tsurumi
PN Tsurumi pond pump
50PN2.25S
$625.00Tsurumi Submersible Pond Fountain Pumps. 3630GPH- Watertight Cable Entrance with Anti-wicking block. 32FT cord
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper ...
3630GPH 1/3HP Learn More
