My Cart

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.
View as List Grid

Items 41-50 of 617

Set Descending Direction
per page
  1. Barnes Pumps

    Submersible Sewage Pump

    4SE11334L

    $9,968.00
    11hp Submersible Sewage Pump. Barnes 4" Horizontal Discharge Solids Handling Pump 4" horizontal discharge handles up to 3" spherical solids. Motor sizes from .9 to 100HP Open and enclosed impellers, some with pump-out vanes on backside. Delta i...
    4" Sewage Pump 230v 11HP Learn More
  2. EBARA Pumps

    Stainless Dewatering Pump

    Optima-3AS1

    $527.00

    Automatic operation, Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a dr...

    1/3HP 115V HS Learn More
  3. Barmesa Pumps

    Grinder Pump 3HP

    BGPH303DS

    $5,031.00

    Grinder Pump by Barmesa. Rugged and reliable grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects sewage. Capacitor and start relay are required separately. Therefore use a control ...

    3HP 230v/3 double seal Learn More
  4. Barnes Pumps

    Submersible Grinder pump 3HP

    SGV3032L

    $6,842.00

    Rugged and reliable SGV Series pumps provide continuous, maintenance-free operation while effectively handling objects such as plastic, rubber, disposable diapers, towels and clothing.

    5HP SGV Series Ideally suited for pressure sewer systems,...

    230v/3ph Learn More
  5. Barmesa Pumps

    Effluent Pump 1hp 480v

    2BEH104SS

    $2,398.00

    Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. High head submersible. Rugged Cast Iron construction. 2 Vane CI bronze impeller handles 3/4" spherical solids. Due to its motor 3450RPM,...

    Submersible effluent pump, 460v 1HP for solids up to 3/4", High head Learn More
  6. Barmesa Pumps

    Submersible 1HP 3" Sewage Pump

    3BSE102SS

    $1,823.00

    Submersible NON-CLOG pump, Barmesa 1.5" spherical solids handling. 25 ft. cord. All cast iron. Impeller Design: open, double vane.Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. 62180508 

    Barmesa 3BSE-SS Series Submersible...

    200/230/v/1 1HP Learn More
  7. Tsurumi

    PSF Pond Pump

    50PSF2.75S-61 115V

    $908.00
    Tsurumi Submersible Pond Fountain Pumps. Manual Operation
    • Watertight Cable Entrance with Anti-wicking block.
    • Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
    • Built in motor protection
    • Continuous duty air filled copper wo...
    115v/1 Learn More
  8. Tsurumi

    High Volume submersible Tsurumi

    NK3-22L

    $3,087.00
    Electric submersible Tsurumi . Tsurumi Submersible Pumps -Heavy duty, high head dewatering pump. Designed for handling abrasive material with minimal wear. Rubber wear plate is integral part of casing. Top discharge provides maximum motor cooli...
    3HP 220v Learn More
  9. Barmesa Pumps

    Submersible 2HP 3" Sewage Pump

    3BSE202SS

    $3,795.00

    Submersible NON-CLOG 2hp pump, 2-1/2" spherical solids handling. 25 ft. cord. All cast iron. Impeller Design: open, double vane. Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Inboard, oil filled shaft seal. 

    200/230v sin...

    200/230v/1 2HP Learn More
  10. Tsurumi

    LB Dewatering Pump

    LB-480

    $533.00

    Dewatering Pump, electric. 

    Heavy duty, LB-480-62 made for the contractor & retal stores but used by consumers demanding quality and long life out of a submersible water pump. LB480 is Not a full trash pump but will handle dewatering ditches, pud...

    Manual 115V 2" 0.66HP Learn More
View as List Grid

Items 41-50 of 617

Set Descending Direction
per page