Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Tramco
Heavy Duty Sump Pump 9FT
500SS-A3-
$7,591.56Tramco Vertical Column Water Sump Pump. 9 foot model with 1 HP motor.
The Series 500 is fitted with a semi-open impeller accurately machined and balanced for smooth, quiet operation. Also available in all iron and 316 stainless steel. Mechanical ...
1.5hp, 3ph Shaft 316 Stainless Steel Learn More -
AMT Pumps
MSV1 1.5 HP 12 stage pump
MSV1-12-1P
$1,567.00Multistage Vertical booster pump. Commercial / industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installatio...115/208-230V Learn More -
Barmesa Pumps
Submersible 1.5HP 3" Sewage Pump
3BSE154SS
$3,422.00Submersible Sewage NON-CLOG pump, 2-1/2" spherical solids handling 460v.
Heavy duty waste water pumps for all commercial applications
Features:
- 25 ft. cord.
- All cast iron.
- Silicon Carbide SiC inboard shaft seal in oil filled chamber
- Impel...
460v/3 1.5HP Learn More -
Barmesa Pumps
Submersible 1.5HP 3" Sewage Pump
3BSE153SS
$3,422.003" Submersible Sewage NON-CLOG pump, 2-1/2" spherical solids handling.
Heavy duty waste water pumps for all commercial applications
Features:
- 25 ft. cord.
- All cast iron.
- Silicon Carbide SiC inboard shaft seal in oil filled chamber
- Impelle...
200/230/3 1.5HP Learn More -
EBARA Pumps
Stainless Vertical Booster pump
EVMSU1-13F0150T1S
$2,681.36Stainless Steel Vertical Booster pump. With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA Model EVMU is designed for booster, water purification, and hot water applications.State-of-the-art formed stainless steel and sever...
1 1/2HP 115/230V TEFC Learn More -
Webtrol
18GPM Vertical Booster Pump
NV12B5FV3T
$4,556.25The Webtrol V Series is a vertical multistage pump offering technically advanced designs to meet market demands including hot water applications. Every Webtrol V Series pump is hand assembled and checked during each step of the assembly process...1 1/2HP 208-230/460V TEFC Learn More -
Webtrol
18GPM Vertical Booster Pump
NV12B6FV3T
$4,821.75The Webtrol V Series is a vertical multistage pump offering technically advanced designs to meet market demands including hot water applications. Every Webtrol V Series pump is hand assembled and checked during each step of the assembly process...1 1/2HP 208-230/460V TEFC Learn More -
EBARA Pumps
Stainless Steel Vertical Booster pump
EVMSU3-6F0150T3S
$2,170.74Stainless Steel Vertical Booster pump for water. With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA Model EVMU is designed for booster, water purification, and hot water applications.State-of-the-art formed stainless ste...
1 1/2HP 208-230/460V TEFC Learn More -
EBARA Pumps
SS sewage 1.5hp
50DWAU61.1S2
$1,685.77Ebara SS sewage submersible pump. Automatic w/ float switch. Impeller type: Single channel impeller, non-clog.1 1/2HP 230V HS Learn More -
Barnes Pumps
Sewage Pump
3SE1542L
$3,883.00132844 Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 16.0; 2-/12" spherical handling1.5hp, 460v/3ph Learn More